why does my Honda Civic 10th Generation (2016-2021) shake when accelerating?

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

614 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported with jack stands before working on it.
•Allow the vehicle to cool if it has been driven recently before attempting any inspections.

Symptoms

•Vibrations felt through the steering wheel or seat during acceleration
•Uneven tire wear
•Poor steering response or drifting
•Check tire pressure warning light illuminated
•Noise from the wheels or drivetrain when accelerating

Diagnostic Steps

1
Inspect tire condition and pressure; check for bulges, uneven wear, or improper inflation.
2
Perform a visual inspection of suspension components for damage or wear (e.g., control arms, bushings).
3
Check wheel balance by using a wheel balancer; look for imbalances in the wheels.
4
Inspect drivetrain components, including axles and CV joints, for signs of damage or wear.
5
Scan for error codes using an OBD-II scanner to identify any related issues.
6
Test drive the vehicle to replicate the shaking and determine if it occurs at specific speeds or conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Floor jack
•Jack stands
•Tire pressure gauge
•Torque wrench
•OBD-II scanner
•Wheel balancer
•Basic hand tools

Parts Required

•Replacement tires
•Suspension components

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and pressure; check for bulges, uneven wear, or improper inflation.
2
Perform a visual inspection of suspension components for damage or wear (e.g., control arms, bushings).
3
Check wheel balance by using a wheel balancer; look for imbalances in the wheels.
4
Inspect drivetrain components, including axles and CV joints, for signs of damage or wear.
5
Scan for error codes using an OBD-II scanner to identify any related issues.
6
Test drive the vehicle to replicate the shaking and determine if it occurs at specific speeds or conditions.

Solution

1. Preparation

Gather necessary tools and parts before starting the repair.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.

Tools Required:

Floor jack
Jack stands
Tire pressure gauge
Torque wrench
OBD-II scanner
Wheel balancer (if needed)
Basic hand tools (wrenches, sockets)

2. Tire Inspection and Replacement

Sub-steps:
1. Remove the wheel using a floor jack and jack stands.
2. Inspect the tire for any visible damage such as bulges or cuts.
3. Use a tire pressure gauge to check the tire pressure; inflate to the manufacturer's recommended levels if low.
4. If the tire is damaged or excessively worn, replace it with a new tire.
5. Reinstall the wheel and tighten lug nuts to the manufacturer’s torque specifications.

3. Suspension Component Inspection

Sub-steps:
1. Visually inspect all suspension components, looking for signs of wear or damage, particularly in control arms and bushings.
2. If any components are worn or damaged, replace them with OEM or quality aftermarket parts.
3. Reassemble any disassembled parts and ensure everything is tightened to specifications.

4. Wheel Balancing

Sub-steps:
1. Remove the wheel from the vehicle.
2. Mount the wheel on a wheel balancer and check for imbalances.
3. Add wheel weights as necessary to achieve proper balance.
4. Reinstall the balanced wheel back onto the vehicle and torque to specifications.

5. Drivetrain Inspection

Sub-steps:
1. Inspect the CV joints and axles for any signs of wear or tears in the rubber boots.
2. If any parts are found defective, replace them with new components.
3. Verify that the drivetrain components are properly secured and free of excess play.