how to check and replace the windshield wipers on Honda Civic 10th Generation (2016-2021)

Honda Civic 11th Generation (2022-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

3 min read

421 words

Problem Statement

Learn how to check and replace windshield wipers on Honda Civic 10th Generation (2016-2021). Step-by-step guide for effective wiper maintenance.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the wipers are off and the ignition is turned off before working on them to avoid accidental activation.

Symptoms

•Wipers leaving streaks on the windshield
•Wipers skipping or not making full contact with the glass
•Squeaking noises during operation
•Wipers not functioning at all
•Torn or damaged wiper blades

Diagnostic Steps

1
Inspect wiper blades visually for any signs of wear, such as cracks or tears.
2
Test wipers in various speeds to assess functionality and performance.
3
Check the wiper arm for proper tension and alignment against the windshield.
4
Verify the windshield washer fluid level and spray function to ensure proper cleaning.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None necessary for wiper blade replacement

Parts Required

•New windshield wiper blades (appropriate size for front and rear if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect wiper blades visually for any signs of wear, such as cracks or tears.
2
Test wipers in various speeds to assess functionality and performance.
3
Check the wiper arm for proper tension and alignment against the windshield.
4
Verify the windshield washer fluid level and spray function to ensure proper cleaning.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface with the engine off.
Raise the wiper arms away from the windshield.

2. Remove Old Wiper Blades

Locate the wiper blade release tab (usually on the underside of the blade).
Press the release tab and slide the wiper blade off the wiper arm.
Repeat for the other wiper blade.

3. Install New Wiper Blades

Remove the new wiper blades from their packaging.
Align the new wiper blade with the wiper arm.
Slide the wiper blade onto the arm until you hear a click, indicating it is securely attached.
Ensure that the blade is positioned correctly and make any adjustments as necessary.

4. Test Wiper Functionality

Lower the wiper arms back onto the windshield.
Start the vehicle and activate the wipers to ensure they function properly.
Check for any unusual noises or issues during operation.