how to fix P0135 code on Honda Civic 11th Generation (2022-Present)

Honda Civic 11th Generation (2022-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0135

3 min read

492 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0135 oxygen sensor heater circuit issues in Honda Civic 2022. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0135

Affected Component

Exhaust System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the exhaust system to cool before touching any components.

Symptoms

•Check engine light illuminated
•Poor fuel economy
•Rough idle or stalling
•Increased emissions
•Failed emissions test

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm the P0135 code.
2
Inspect the oxygen sensor wiring for any visible damage or disconnections.
3
Check the voltage and ground at the oxygen sensor connector with a multimeter.
4
Measure the resistance of the oxygen sensor heater element to ensure it is within specifications.
5
Inspect related fuses and wiring for continuity and condition.
6
Clear the codes and perform a test drive to see if the P0135 code returns.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•O2 sensor socket
•Torque wrench
•Wire stripper
•Electrical tape

Parts Required

•New oxygen sensor (Bank 1 Sensor 1)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm the P0135 code.
2
Inspect the oxygen sensor wiring for any visible damage or disconnections.
3
Check the voltage and ground at the oxygen sensor connector with a multimeter.
4
Measure the resistance of the oxygen sensor heater element to ensure it is within specifications.
5
Inspect related fuses and wiring for continuity and condition.
6
Clear the codes and perform a test drive to see if the P0135 code returns.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Repair Wiring

Tools Required: Wire stripper, electrical tape, multimeter
Inspect the oxygen sensor wiring harness for any frays, corrosion, or breaks.
Repair any damaged wiring using solder or appropriate connectors and cover with electrical tape.
Ensure all connections are secure.

3. Replace Oxygen Sensor

Tools Required: O2 sensor socket, torque wrench, penetrating oil
Locate the oxygen sensor on the exhaust manifold (Bank 1 Sensor 1).
Apply penetrating oil to the sensor threads if necessary to ease removal.
Disconnect the electrical connector from the oxygen sensor.
Use the O2 sensor socket to unscrew the old sensor from the exhaust manifold.
Install the new oxygen sensor, ensuring it is properly threaded and tightened to the manufacturer’s specifications (typically around 30-40 lb-ft).
Reconnect the electrical connector securely.

4. Reconnect Battery and Test

Reconnect the battery terminals.
Start the engine and let it warm up to operating temperature.
Monitor the engine for any abnormal sounds or issues post-repair.