FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset maintenance light on Honda Civic 9th Generation (2012-2015)? - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/how to reset maintenance light on Honda Civic 9th Generation (2012-2015)?

how to reset maintenance light on Honda Civic 9th Generation (2012-2015)?

Honda Civic 11th Generation (2022-Present)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
345 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2015 Honda Civic with this simple step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe and stationary position while performing the reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No changes in vehicle performance
  • •Scheduled maintenance has been completed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure you have completed any necessary maintenance that triggered the light.
2. Resetting the Maintenance Light
  1. Insert Key: Place the key in the ignition without starting the engine.
  2. Press Gas Pedal: Quickly press the gas pedal three times within five seconds. This action triggers the reset process.
  3. Turn Ignition ON: Turn the ignition switch to the "ON" position (do not start the engine) immediately after pressing the gas pedal.
  4. Check Maintenance Light: Observe the maintenance light; it should blink and then turn off. This indicates a successful reset.
  5. Turn Off Ignition: Turn the ignition switch back to the "OFF" position to complete the procedure.