FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Civic 10th Generation (2016-2021) - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/how to reset the maintenance light on Honda Civic 10th Generation (2016-2021)

how to reset the maintenance light on Honda Civic 10th Generation (2016-2021)

Honda Civic 11th Generation (2022-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
399 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 10th Generation (2016-2021) with this step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notification displayed on the instrument cluster
  • •Vehicle may not show an accurate maintenance status

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this procedure.
  • Ensure the vehicle is parked with the ignition off.
2. Reset Procedure

  1. Turn Off Ignition:

    • Confirm that the ignition is completely turned off.

  2. Press and Hold SELECT/RESET:

    • Locate the SELECT/RESET button on the instrument panel (usually found on the dashboard near the speedometer).
    • Press and hold this button.

  3. Turn Ignition ON:

    • While holding the SELECT/RESET button, turn the ignition to the ON position (do not start the engine).

  4. Wait for the Maintenance Light:

    • Continue holding the SELECT/RESET button until the maintenance light begins to blink, then turns off completely. This indicates that the reset process is successful.

  5. Release the Button:

    • Once the maintenance light is off, release the SELECT/RESET button.

  6. Turn Off Ignition:

    • Turn the ignition back to the OFF position.

  7. Start the Engine:

    • Start the vehicle to confirm that the maintenance light remains off.