how to reset the maintenance light on Honda Civic 10th Generation (2016-2021)

Honda Civic 11th Generation (2022-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

364 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 10th Generation (2016-2021) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•No other warning lights are present
•Vehicle has recently undergone maintenance service

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer display is showing the total mileage, not trip A or B.
3
Press the 'Select/Reset' button on the dashboard until the maintenance message appears.
4
Hold the 'Select/Reset' button for about 10 seconds until the maintenance light begins to blink.
5
Release the button, then press and hold it again until the maintenance light turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No tools required

Parts Required

•No parts required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer display is showing the total mileage, not trip A or B.
3
Press the 'Select/Reset' button on the dashboard until the maintenance message appears.
4
Hold the 'Select/Reset' button for about 10 seconds until the maintenance light begins to blink.
5
Release the button, then press and hold it again until the maintenance light turns off.

Solution

1. Preparation

Gather the necessary tools: None required for this procedure.
Ensure the vehicle is parked safely and the ignition is turned off.

2. Turn Ignition On

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Confirm that all dashboard lights are illuminated.

3. Access Odometer Display

Locate the "Select/Reset" button on the dashboard.
If the odometer is not displaying the total mileage, press the "Select/Reset" button until it shows the total mileage reading.

4. Reset Maintenance Light

Press and hold the "Select/Reset" button for about 10 seconds.
Watch for the maintenance light to start blinking, indicating it's in reset mode.
Release the button, then press and hold it again until the maintenance light turns off.