FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) makes a whining noise when turning - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/my Honda Civic 10th Generation (2016-2021) makes a whining noise when turning

my Honda Civic 10th Generation (2016-2021) makes a whining noise when turning

Honda Civic 11th Generation (2022-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
581 words

Problem Statement

Learn how to diagnose and fix whining noise when turning in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before starting any repairs.

Symptoms

  • •Whining noise during left or right turns
  • •Increased steering effort at low speeds
  • •Fluid leaks around the power steering system
  • •Unusual vibrations in the steering wheel
  • •Steering wheel feels loose or unresponsive

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Line wrench
  • •Torque wrench
  • •Jack and jack stands
  • •Pickle fork

Parts Required

  • •Power steering fluid
  • •Power steering pump (if faulty)
  • •Steering rack (if worn)
  • •Steering belt (if damaged)

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Park the vehicle on a level surface and engage the parking brake.
  • Disconnect the battery to avoid electrical shorts.
2. Inspect and Refill Power Steering Fluid
  • Locate the power steering fluid reservoir.
  • Remove the cap and check the fluid level; top off with the manufacturer-recommended fluid if low.
  • Check for fluid quality; if dark or contaminated, consider a full flush.
3. Inspect Power Steering Pump
  • Remove any covers obstructing access to the power steering pump.
  • Visually inspect the pump for leaks, cracks, or damage.
  • If noise persists, replace the power steering pump:
    1. Disconnect the power steering lines using a line wrench.
    2. Remove the mounting bolts with a socket set.
    3. Install the new pump and secure it with the bolts to the specified torque (usually around 14-18 ft-lbs).
    4. Reconnect the power steering lines, ensuring they are tight.
4. Examine Steering Rack and Components
  • Lift the vehicle and secure it with jack stands.
  • Inspect the steering rack and tie rod ends for wear or excessive play.
  • If any components are worn, replace them:
    1. Remove the tie rod end from the steering knuckle using a pickle fork.
    2. Unbolt the steering rack from its mounts and pull it out.
    3. Install the new rack and secure it, ensuring proper alignment.
5. Check Steering Belt
  • Inspect the steering belt for signs of wear or damage.
  • If worn, replace it:
    1. Loosen the tensioner bolt and remove the old belt.
    2. Install the new belt, ensuring it is properly aligned on all pulleys.
    3. Adjust the tension to the manufacturer’s specifications.