FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what does it mean when the Honda Civic 10th Generation (2016-2021) oil pressure light comes on - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/what does it mean when the Honda Civic 10th Generation (2016-2021) oil pressure light comes on

what does it mean when the Honda Civic 10th Generation (2016-2021) oil pressure light comes on

Honda Civic 11th Generation (2022-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
645 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the oil pressure light issue in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the oil drain plug.

Symptoms

  • •Oil pressure warning light illuminated on the dashboard
  • •Engine noise (ticking or knocking sounds)
  • •Low oil level
  • •Engine overheating
  • •Decreased engine performance or power

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Oil filter wrench

Parts Required

  • •New engine oil (0W-20)
  • •New oil filter
  • •Oil drain plug washer (if applicable)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required: OBD-II scanner, multimeter, socket set, torque wrench, oil filter wrench, new oil filter, and fresh engine oil.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
2. Check and Replace Engine Oil

  1. Drain Old Oil

    • Place a drain pan under the oil pan.
    • Remove the oil drain plug using a socket set and allow the old oil to completely drain.
    • Replace the drain plug and torque to manufacturer's specifications (typically around 30 ft-lbs).

  2. Replace Oil Filter

    • Use an oil filter wrench to remove the old oil filter.
    • Lubricate the rubber gasket of the new filter with fresh oil and install it by hand until snug, then tighten slightly more (usually 3/4 turn).

  3. Add New Oil

    • Pour the recommended type and amount of new engine oil (consult owner’s manual, typically 0W-20 for Honda Civic).
    • Start the engine and let it run for a minute, then check the oil level again with the dipstick and add more oil if necessary.
3. Test Oil Pressure Sending Unit

  1. Disconnect Electrical Connector

    • Locate the oil pressure sending unit and carefully disconnect the electrical connector.

  2. Test with Multimeter

    • Use a multimeter to check resistance across the terminals of the sending unit. Compare readings with specifications in the repair manual. Replace if faulty.
4. Inspect Oil Pump

  1. Remove Oil Pump

    • Follow the manufacturer's instructions to remove the oil pan.
    • Disconnect any necessary components (like the oil pickup tube) to access the oil pump.

  2. Check for Damage

    • Inspect the oil pump for wear or damage. Replace it if there are issues with the gears or housing.
5. Reassemble and Refill

  1. Reassemble

    • Reinstall the oil pan and ensure all bolts are torqued to spec.
    • Reconnect any components that were removed.

  2. Refill the System

    • Add new oil through the oil filler cap if not already completed in previous steps.