Honda Civic 9th Generation (2012-2015) P0700 code what does it mean

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

524 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control malfunction in Honda Civic 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine and transmission to cool before servicing.

Symptoms

•Check engine light illuminated
•Harsh or erratic shifting
•Transmission slipping or failing to engage
•Reduced fuel efficiency
•Unusual noises from the transmission area

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to confirm the P0700 code and check for any additional codes.
2
Inspect the transmission fluid level and condition; low, burnt, or contaminated fluid may indicate issues.
3
Visually inspect wiring and connectors related to the transmission control module (TCM) for damage or corrosion.
4
Check the battery voltage; low voltage can affect the transmission control system.
5
Test the TCM with a multimeter for proper voltage and ground signals.
6
Examine the vehicle's fuse box for any blown fuses related to the transmission system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid pump
•Socket set
•Multimeter
•Drain pan

Parts Required

•Transmission fluid
•Transmission filter (if applicable)
•Transmission pan gasket
•TCM (if found faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to confirm the P0700 code and check for any additional codes.
2
Inspect the transmission fluid level and condition; low, burnt, or contaminated fluid may indicate issues.
3
Visually inspect wiring and connectors related to the transmission control module (TCM) for damage or corrosion.
4
Check the battery voltage; low voltage can affect the transmission control system.
5
Test the TCM with a multimeter for proper voltage and ground signals.
6
Examine the vehicle's fuse box for any blown fuses related to the transmission system.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the vehicle's battery to prevent electrical shorts.
Ensure the vehicle is on a level surface and secure with wheel chocks.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid pump, socket set, drain pan
Remove the transmission pan by loosening the bolts with a socket set.
Allow the old fluid to drain into a drain pan.
Replace the transmission filter if applicable.
Reinstall the transmission pan with a new gasket and torque bolts to the manufacturer’s specifications.
Refill the transmission with the correct type and amount of fluid.

3. Repair or Replace Wiring/Connectors

Inspect the wiring harness connected to the TCM for any signs of wear or damage.
Repair or replace any damaged wiring or connectors.
Ensure all connections are secure and free of corrosion.

4. Test the TCM

Tools Required: Multimeter
Reconnect the battery and turn the ignition to the "on" position without starting the engine.
Use a multimeter to check the voltage at the TCM connectors. Compare readings against manufacturer specifications.
If the TCM is faulty, replace it with a new unit, ensuring to follow the manufacturer’s programming guidelines.