how to fix P0700 code in Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

558 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control system malfunction in Honda Civic 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission or draining fluid.

Symptoms

•Check engine light illuminated
•Harsh or erratic shifting
•Delayed engagement when shifting from park to drive
•Transmission slipping
•Poor acceleration or power loss
•Transmission overheating

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0700 and check for additional transmission-related codes.
2
Inspect the transmission fluid level and condition; check for contamination or burning smell.
3
Examine the wiring and connectors to the transmission control module for damage or corrosion.
4
Check the TCM for faults using a compatible diagnostic tool, if supported by the vehicle.
5
Perform a visual inspection of the transmission and related components for leaks or damage.
6
Test the transmission solenoids for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fluid pump
•Drain pan
•Multimeter
•Socket set
•Screwdriver set

Parts Required

•Honda ATF (DW-1)
•TCM (if faulty)
•Transmission solenoids (if faulty)
•Transmission pan gasket

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0700 and check for additional transmission-related codes.
2
Inspect the transmission fluid level and condition; check for contamination or burning smell.
3
Examine the wiring and connectors to the transmission control module for damage or corrosion.
4
Check the TCM for faults using a compatible diagnostic tool, if supported by the vehicle.
5
Perform a visual inspection of the transmission and related components for leaks or damage.
6
Test the transmission solenoids for proper operation.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the vehicle's battery to avoid electrical shorts.
Ensure the vehicle is on a level surface and safely supported with jack stands.

2. Inspect and Replace Transmission Fluid

Tools Required: Fluid pump, drain pan, funnel
Remove the drain plug from the transmission pan to drain old fluid.
Inspect the fluid; if contaminated, replace it.
Reinstall the drain plug and refill with the correct type of Honda ATF (typically Honda DW-1).
Check fluid level using the dipstick after running the engine briefly.

3. Repair or Replace TCM

Tools Required: Socket set, screwdriver set
Locate the TCM, usually found near the transmission.
Disconnect electrical connectors from the TCM.
Unbolt the TCM from its mounting location and remove it.
If the TCM is faulty, replace it with a new or refurbished unit.
Reinstall the TCM, reconnect the electrical connectors, and secure it in place.

4. Test and Replace Transmission Solenoids (if needed)

Tools Required: Multimeter, socket set
Access the transmission valve body by removing the transmission pan.
Inspect the solenoids for signs of wear or damage.
Use a multimeter to test solenoid resistance. Replace any solenoids that are out of specification.
Reinstall the valve body and transmission pan with new gaskets, torquing bolts to the manufacturer’s specifications.