FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset my Honda Civic 9th Generation (2012-2015) maintenance light - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to reset my Honda Civic 9th Generation (2012-2015) maintenance light

how to reset my Honda Civic 9th Generation (2012-2015) maintenance light

Honda Civic 9th Generation (2012-2015)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
293 words

Problem Statement

Learn how to reset the maintenance light on your Honda Civic 9th Generation (2012-2015) with this quick and easy guide. Step-by-step instructions included.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Possible need for routine service (oil change, tire rotation, etc.)
  • •No other warning lights present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this reset.
2. Perform the Reset
  1. Ensure the vehicle is completely off.
  2. Locate the trip meter reset button, usually found on the dashboard.
  3. Press and hold the trip meter reset button.
  4. Turn the ignition to the "ON" position (do not start the engine).
  5. Continue holding the reset button until the maintenance light blinks and then goes off.
  6. Release the trip meter reset button.
  7. Turn off the ignition and then start the engine to verify the reset.