how to reset the maintenance light in Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

326 words

Problem Statement

Learn how to reset the maintenance light in Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy process.

Affected Component

Electrical

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure vehicle is in 'Park' or 'Neutral' and on a flat surface before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle may have recently undergone maintenance

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is off.
2
Turn the ignition switch to the 'ON' position without starting the engine.
3
Press the gas pedal three times within 5 seconds.
4
Check if the maintenance light flashes and then goes out.
5
Turn the ignition off and then back on to confirm the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is off.
2
Turn the ignition switch to the 'ON' position without starting the engine.
3
Press the gas pedal three times within 5 seconds.
4
Check if the maintenance light flashes and then goes out.
5
Turn the ignition off and then back on to confirm the reset.

Solution

1. Preparation

Gather necessary tools:
- None required for this procedure.
Ensure the vehicle is in a safe and stable position.

2. Turn on Ignition

Insert the key into the ignition and turn it to the "ON" position (do not start the engine).

3. Reset Maintenance Light

Press the gas pedal three times within 5 seconds.
Observe the maintenance light; it should blink and then turn off, indicating a successful reset.

4. Verify Reset

Turn the ignition off and then turn it back on to ensure the maintenance light is no longer illuminated.