FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light in my Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to reset the maintenance light in my Honda Civic 9th Generation (2012-2015)

how to reset the maintenance light in my Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
348 words

Problem Statement

Learn how to reset the maintenance light in your 2012-2015 Honda Civic 9th Generation. Step-by-step instructions for a quick and easy reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is stationary and in park before performing the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Engine performance symptoms may not be present
  • •Maintenance interval nearing or past due

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required.

Parts Required

  • •None required for reset procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is in a safe and well-lit area.
  • Gather necessary tools: None specifically required for this process.
2. Ignition Cycle
  1. Turn Ignition On
    • Insert the key into the ignition or press the start button (if equipped) and turn the ignition to the "ON" position without starting the engine.
  2. Press the Gas Pedal
    • Firmly press the gas pedal three times within five seconds.
  3. Turn Ignition Off
    • Turn the ignition switch to the "OFF" position.
3. Confirm Reset
  1. Turn Ignition On Again
    • Turn the ignition back to the "ON" position.
  2. Check Maintenance Light
    • Observe the dashboard to ensure the maintenance light has turned off.