FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
374 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) after maintenance. Step-by-step guide for a quick reset.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the car is in park mode and the ignition is turned off before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No engine performance issues present
  • •Recent maintenance service completed (e.g., oil change, filter replacement)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this reset.
  • Ensure the vehicle is parked in a safe area with the engine off.
2. Resetting the Maintenance Light
  1. Turn the ignition switch to the "ON" position (do not start the engine).
  2. Locate the trip reset button on the dashboard (usually found on the right side of the instrument panel).
  3. Press the trip reset button until the odometer is displayed.
  4. Turn off the ignition completely.
  5. Press and hold the trip reset button again.
  6. While holding the button, turn the ignition switch back to the "ON" position (do not start the engine).
  7. Keep holding the trip reset button until you see the maintenance light blink and turn off, which indicates the reset is successful.