FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
382 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) after routine maintenance. Step-by-step guide for easy reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and on a level surface before beginning the reset process.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •Reminder for oil change or service displayed on the gauge cluster
  • •No other warning lights are present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ensure the vehicle is parked in a safe location with the engine off.

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: None
  • Ensure the vehicle is parked in a safe location with the engine off.
2. Reset Maintenance Light

  1. Access the Instrument Panel:

    • Sit in the driver's seat and locate the "Select/Reset" button on the instrument cluster, usually near the speedometer.

  2. Begin the Reset Process:

    • Press and hold the "Select/Reset" button.

  3. Turn the Ignition On:

    • While holding the button, turn the ignition key to the "ON" position (do not start the engine).

  4. Complete the Reset:

    • Continue holding the "Select/Reset" button until the maintenance light blinks and then turns off, which usually takes about 10 seconds.

  5. Finalize the Reset:

    • Release the "Select/Reset" button.
    • Turn the ignition off and then back on to confirm the maintenance light is no longer illuminated.