how to reset the maintenance light on my Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

315 words

Problem Statement

Learn how to reset the maintenance light on your Honda Civic 9th Generation (2012-2015) with this simple step-by-step guide.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and the parking brake is engaged before starting the reset procedure.

Symptoms

•Maintenance light is illuminated on the dashboard
•Previous service items have been completed (oil change, filter replacement, etc.)
•No engine performance issues related to the reset

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Insert the key into the ignition without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'On' position without starting the engine.
5
Check if the maintenance light turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required.
Ensure the vehicle is parked in a safe location with the engine off.

2. Ignition Key Position

Insert the ignition key into the ignition slot.
Do not start the engine; simply turn the key to the "On" position.

3. Gas Pedal Steps

Press the gas pedal down three times quickly (within five seconds).
Ensure the pedal is fully pressed down for each step.

4. Verify Light Status

After completing the gas pedal steps, turn the ignition back to the "Off" position.
Start the vehicle to confirm that the maintenance light has been reset.