how to reset the oil light on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

361 words

Problem Statement

Learn how to reset the oil light on Honda Civic 9th Generation (2012-2015) after an oil change. Step-by-step guide for quick and easy reset.

Affected Component

Engine

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position with the engine off before performing the reset.

Symptoms

•Oil light remains illuminated on the dashboard
•Oil change indicator message displayed on the screen
•Vehicle maintenance reminder shows in the digital display

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Turn the ignition key to the 'ON' position without starting the engine (or press the start button twice without pressing the brake).
3
Check if the oil change indicator is displayed in the trip computer.
4
Locate the 'Select/Reset' button on the dashboard.
5
Observe the oil life indicator percentage.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Turn the ignition key to the 'ON' position without starting the engine (or press the start button twice without pressing the brake).
3
Check if the oil change indicator is displayed in the trip computer.
4
Locate the 'Select/Reset' button on the dashboard.
5
Observe the oil life indicator percentage.

Solution

1. Preparation

Gather the necessary tools: None required for this procedure.
Ensure the vehicle is in a safe and stationary position.

2. Accessing the Oil Life Reset Feature

Turn the ignition to the "ON" position (do not start the engine).
Press the "Select/Reset" button until the oil life percentage is displayed.

3. Resetting the Oil Life

With the oil life percentage displayed, press and hold the "Select/Reset" button.
Hold the button until the oil life indicator begins to blink, then release the button.
Press and hold the "Select/Reset" button again until the oil life resets to 100%.

4. Finalizing the Process

Turn the ignition off and then back on to ensure the oil light is extinguished.