FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 9th Generation (2012-2015) does not accelerate when I press the gas - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/my Honda Civic 9th Generation (2012-2015) does not accelerate when I press the gas

my Honda Civic 9th Generation (2012-2015) does not accelerate when I press the gas

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
607 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix acceleration issues in 2012-2015 Honda Civic. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Allow the engine to cool before opening the fuel system

Symptoms

  • •Engine revs without acceleration
  • •Unresponsive throttle
  • •Check engine light illuminated
  • •Poor fuel economy
  • •Possible stalling when coming to a stop

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge

Parts Required

  • •Throttle body cleaner
  • •Accelerator pedal position sensor (if needed)
  • •Fuel pump (if needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: OBD-II scanner, multimeter, socket set, torque wrench, fuel pressure gauge.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery before working on electrical systems.
2. Throttle Body Cleaning
  1. Remove the air intake duct from the throttle body:
    • Use a socket set to loosen the clamps.
  2. Access the throttle body:
    • Disconnect any electrical connectors and vacuum lines attached to it.
  3. Clean the throttle body:
    • Use throttle body cleaner and a soft cloth or brush to remove carbon deposits.
    • Ensure the throttle plate moves freely.
  4. Reassemble the throttle body:
    • Reconnect electrical connectors and vacuum lines, ensuring they are secure.
    • Reinstall the air intake duct and clamps.
3. Accelerator Pedal Position Sensor Inspection
  1. Locate the accelerator pedal position sensor:
    • It is usually mounted on the throttle pedal assembly.
  2. Disconnect the wiring harness from the sensor.
  3. Use a multimeter to measure the voltage output at the sensor:
    • Verify it matches manufacturer specifications (usually around 0.5V to 4.5V when the pedal is pressed).
  4. If the sensor is faulty, replace it:
    • Remove the sensor using a socket set.
    • Install the new sensor and reconnect the wiring harness.
4. Fuel System Check
  1. Inspect the fuel pump operation:
    • Turn the ignition key to the "On" position (do not start the engine) and listen for the fuel pump priming.
  2. Measure fuel pressure:
    • Connect a fuel pressure gauge to the fuel rail.
    • Verify the pressure is within the manufacturer's specified range (usually around 40-50 psi).
  3. Replace the fuel pump if pressure is inadequate:
    • Remove the rear seat or access panel to locate the fuel pump.
    • Disconnect electrical connectors and fuel lines, then replace the pump.
5. Transmission Fluid Check
  1. Park the vehicle on a level surface and warm the engine.
  2. Remove the transmission dipstick (if applicable) and check fluid level:
    • Add fluid if low, ensuring the correct type is used (usually Honda ATF).
  3. If fluid is burnt or contaminated, consider a fluid change.