FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Civic 9th Generation (2012-2015) AC blow hot air - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/why does my Honda Civic 9th Generation (2012-2015) AC blow hot air

why does my Honda Civic 9th Generation (2012-2015) AC blow hot air

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
530 words

Problem Statement

Learn how to diagnose and fix AC blowing hot air in Honda Civic 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Wear safety goggles and gloves when handling refrigerants.

Symptoms

  • •AC compressor does not engage
  • •Warm air blowing from vents
  • •Unusual noises from the AC system
  • •Decreased airflow from vents
  • •AC pressure readings are outside normal range

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Refrigerant gauge
  • •Socket set
  • •Torque wrench
  • •Screwdriver set

Parts Required

  • •R-134a refrigerant
  • •AC compressor (if needed)
  • •Cabin air filter

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to avoid electrical shocks.
  • Allow the vehicle to cool if recently driven.
2. Recharge Refrigerant
  1. Locate the low-pressure service port on the AC system (typically found on the larger diameter tubing).
  2. Connect the refrigerant gauge to the service port.
  3. If refrigerant is low, add the appropriate type of refrigerant (R-134a) according to manufacturer specifications.
  4. Monitor the pressure gauge to ensure it reaches the recommended level.
3. Inspect and Replace AC Compressor
  1. Remove the drive belt by loosening the tensioner pulley using a socket set.
  2. Disconnect the electrical connector from the AC compressor.
  3. Remove the mounting bolts securing the compressor to the engine.
  4. Carefully take out the old compressor and replace it with a new one.
  5. Reattach the mounting bolts and tighten to manufacturer torque specifications.
4. Check and Replace the Cabin Air Filter
  1. Open the glove compartment and remove it to access the cabin air filter.
  2. Remove the old filter and inspect for dirt or blockage.
  3. Install a new cabin air filter, ensuring it is oriented correctly.
5. Reconnect Battery and Test
  • Reconnect the battery terminals.
  • Start the vehicle and turn on the AC to check if it blows cold air.