why does my Honda Civic 9th Generation (2012-2015) make a popping noise when turning

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

465 words

Problem Statement

Learn how to diagnose and fix popping noise when turning in Honda Civic 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath.
•Disconnect the battery before working on electrical components.

Symptoms

•Popping or clunking noise during turns
•Noise occurs more prominently at low speeds
•Uneven tire wear
•Steering wheel vibration or looseness
•Difficulty in steering or feeling of resistance

Diagnostic Steps

1
Inspect the front suspension components visually for wear or damage.
2
Check the CV joints for signs of grease leakage or joint wear.
3
Test the wheel bearings for play by shaking the wheel at the 12 and 6 o'clock positions.
4
Examine the strut mounts for signs of damage or deterioration.
5
Perform a road test to determine if noise occurs only during specific turning maneuvers.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Breaker bar
•Torque wrench
•Jack and jack stands

Parts Required

•CV joint or axle (if needed)
•Strut mount (if needed)
•Wheel bearings (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the front suspension components visually for wear or damage.
2
Check the CV joints for signs of grease leakage or joint wear.
3
Test the wheel bearings for play by shaking the wheel at the 12 and 6 o'clock positions.
4
Examine the strut mounts for signs of damage or deterioration.
5
Perform a road test to determine if noise occurs only during specific turning maneuvers.

Solution

1. Preparation

Gather tools and parts needed for repairs.
Ensure the vehicle is on a level surface and secured with jack stands.
Disconnect the battery if working on electrical components.

2. Inspect Suspension Components

Remove the front wheel using a socket set.
Check upper and lower control arms for any cracks or breaks.
Inspect ball joints for movement; replace if worn.

3. Check CV Joints

Remove the axle nut using a breaker bar and socket.
Pull the axle out to inspect the CV joint for any signs of wear or damage.
Replace the CV joint or axle if grease is leaking or if any damage is visible.

4. Inspect Strut Mounts

Remove the top strut mount nuts using a socket set.
Check the condition of the strut mount; replace if cracked or deteriorated.
Reinstall the strut mount and torque to the manufacturer specifications.

5. Check Wheel Bearings

Remove the brake caliper and rotor to access the wheel hub.
Spin the hub and listen for any noise, indicating bad bearings.
Replace any faulty wheel bearings and reassemble in reverse order.