FAULTBASE
NEWSASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/how to fix P0171 code in Honda CR-V Fifth Generation (2017-2022)

how to fix P0171 code in Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Fifth Generation (2017-2022)

Severity: highDifficulty: mediumError Code: P01712-4 hours
4 min read
633 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0171 engine lean condition in Honda CR-V (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0171
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components.
  • ⚠Allow the engine to cool down before attempting to inspect or repair components.

Symptoms

  • •Check engine light illuminated
  • •Engine stalling or rough idle
  • •Poor acceleration and loss of power
  • •Decreased fuel economy
  • •Increased emissions
  • •Unusual engine noises (e.g., popping or backfiring)

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the P0171 code and check for other related codes.
  2. 2Inspect the air intake system for leaks, including the intake manifold, vacuum hoses, and throttle body.
  3. 3Check the fuel pressure using a fuel pressure gauge to ensure it meets manufacturer specifications.
  4. 4Inspect the mass air flow (MAF) sensor for dirt or damage and clean or replace if necessary.
  5. 5Verify the operation of the fuel injectors by performing a balance test or checking for proper electrical signals.
  6. 6Inspect the engine coolant temperature sensor for proper readings and functionality.

Solution

Solution

1. Preparation

  • Gather all necessary tools and parts.
  • Disconnect the battery to ensure safety during repairs.
  • Allow the engine to cool down.

2. Inspect and Repair Intake System

  • Tools Required: Socket set, vacuum gauge, flashlight
  • Check all vacuum hoses for cracks or disconnections.
  • Inspect the intake manifold for cracks or leaks; replace gaskets if necessary.
  • Tighten any loose clamps or connections in the air intake system.

3. Clean or Replace the MAF Sensor

  • Tools Required: MAF sensor cleaner or electrical cleaner, screwdriver
  • Locate the MAF sensor in the air intake duct.
  • Disconnect the electrical connector and unscrew the MAF sensor from its housing.
  • Use MAF sensor cleaner to clean the sensing element gently. Let it dry completely.
  • Reinstall the MAF sensor and reconnect the electrical connector.

4. Check and Adjust Fuel Pressure

  • Tools Required: Fuel pressure gauge, fuel line disconnect tool
  • Attach the fuel pressure gauge to the fuel rail.
  • Start the engine and observe the fuel pressure reading; it should match the manufacturer’s specifications (typically around 30-50 psi).
  • If the pressure is low, check the fuel pump and filter for blockages or malfunctions, and replace as necessary.

5. Inspect and Test Fuel Injectors

  • Tools Required: Multimeter, fuel injector tester
  • Use a multimeter to check the electrical resistance of each injector; compare readings with manufacturer specifications.
  • If any injectors are faulty, replace them.
  • Perform a balance test to ensure all injectors are delivering fuel properly.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Fuel pressure gauge
  • Vacuum gauge
  • Socket set
  • Multimeter
  • Screwdrivers
  • MAF sensor cleaner or electrical cleaner
  • Fuel line disconnect tool

Parts Required

  • MAF sensor (if replacement is necessary)
  • Fuel injectors (if replacement is necessary)
  • Intake manifold gaskets (if replacement is necessary)
  • Fuel filter (if replacement is necessary)

Additional Information

Error CodeP0171
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

8 items

Parts

4 items

Related Faults

Discover similar issues

  1. my Honda CR-V has a loud exhaust noise is this normal

    Learn how to diagnose and fix loud exhaust noise in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

    Component:Exhaust System
    Symptoms
    • •Loud exhaust noise, especially during acceleration
    • •Possible vibrations felt inside the vehicle
    • +{count} more

  2. why does my Honda CR-V stall after filling up with gas

    Learn how to diagnose and fix stalling issues after refueling in Honda CR-V. Step-by-step guide with symptoms, diagnostic steps, and repair instructio...

    Component:Fuel System
    Symptoms
    • •Engine stalls shortly after refueling
    • •Difficulty restarting engine after stalling
    • +{count} more

  3. why is my Honda CR-V using so much fuel

    Learn how to diagnose and fix excessive fuel consumption in Honda CR-V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Component:Fuel System
    Symptoms
    • •Check engine light illuminated
    • •Rough idle when the engine is running
    • +{count} more

  4. why does my Honda CR-V's temperature gauge fluctuate wildly

    Learn how to diagnose and fix a fluctuating temperature gauge in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

    Component:Cooling System
    Symptoms
    • •Temperature gauge moves erratically between cold and hot
    • •Engine overheating warning light illuminated
    • +{count} more

  5. why does my Honda CR-V make a popping noise when I accelerate

    Learn how to diagnose and fix popping noise during acceleration in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

    Component:Exhaust System
    Symptoms
    • •Popping noise when accelerating
    • •Possible vibrations felt in the cabin or steering wheel
    • +{count} more

  6. why is my Honda CR-V making a rumbling noise when idling

    Learn how to diagnose and fix a rumbling noise in your Honda CR-V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Component:Engine
    Symptoms
    • •Rumbling noise from the engine compartment
    • •Increased vibration felt in the cabin
    • +{count} more

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation