how to reset the check engine light in Honda CR-V Sixth Generation (2023-present)

Solution

1. Preparation

• Tools Required: OBD-II scanner
• Ensure the vehicle is parked on a level surface and the ignition is turned off.
• Have the vehicle's key or fob handy for ignition.

2. Connect OBD-II Scanner

• Locate the OBD-II port, typically found under the dashboard near the driver's seat.
• Plug the OBD-II scanner into the port securely.

3. Turn On Ignition

• Turn the ignition key to the "On" position without starting the engine, or press the "Start" button without pressing the brake pedal (for push-button start vehicles).

4. Access and Clear Codes

• Turn on the OBD-II scanner.
• Navigate through the scanner's menu to select "Read Codes" to view any stored error codes.
• Once reviewed, navigate to "Clear Codes" or "Erase Codes" and confirm the action.

5. Disconnect Scanner

• After the codes are cleared, safely disconnect the OBD-II scanner from the port.

6. Start the Vehicle

• Start the engine and check if the check engine light is off.
• If the light remains on, further diagnostics may be necessary.