FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda CR-V ABS light is on and traction control is disabled, what should I do? - Honda CR-V
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/my Honda CR-V ABS light is on and traction control is disabled, what should I do?

my Honda CR-V ABS light is on and traction control is disabled, what should I do?

Honda CR-V Fifth Generation (2017-2022)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
583 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix ABS light issues and traction control disablement in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Always ensure the vehicle is securely supported on jack stands before working underneath it.

Symptoms

  • •ABS warning light illuminated on the dashboard
  • •Traction control system disabled
  • •Possible changes in braking performance
  • •Inconsistent brake pedal feel
  • •Warning message displayed on the vehicle's information screen

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Jack and jack stands
  • •Fuse puller
  • •Electrical contact cleaner

Parts Required

  • •ABS wheel speed sensors (if faulty)
  • •ABS fuse (if blown)
  • •Brake fluid (if low)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface with the ignition off.
  • Disconnect the battery to prevent any electrical shorts.
2. Scan for Codes
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Turn the ignition to the "On" position without starting the engine.
  • Retrieve and record any error codes related to the ABS.
3. Inspect Wheel Speed Sensors
  • Raise the vehicle using a jack and secure with jack stands.
  • Remove the wheels to access the ABS wheel speed sensors.
  • Visually inspect each sensor for dirt, damage, or disconnection.
  • Use a multimeter to test the resistance of each sensor to ensure they are functioning within specifications.
4. Check ABS Fuse
  • Locate the fuse box as per the owner's manual.
  • Identify the ABS fuse and remove it using a fuse puller.
  • Inspect the fuse for any signs of damage; replace if blown.
5. Examine Wiring and Connectors
  • Inspect the wiring harness leading to the ABS module for any signs of wear or damage.
  • Clean any corroded connectors with electrical contact cleaner.
  • Ensure all connections are secure and free of debris.
6. Refill Brake Fluid
  • Check the brake fluid level in the master cylinder reservoir.
  • If low, top off with the appropriate brake fluid type (typically DOT 3 or DOT 4).
  • Bleed the brakes if necessary to remove any air from the system.
7. Clear Codes and Test Drive
  • Reconnect the battery and turn the ignition to the "On" position.
  • Use the OBD-II scanner to clear any stored ABS codes.
  • Start the vehicle and perform a test drive to ensure the ABS light remains off and traction control is functioning.