my Honda CR-V Fifth Generation (2017-2022) AC is blowing warm air what to check

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

593 words

Problem Statement

Complete guide to fixing AC that blows warm air in Honda CR-V 2017-2022. Includes symptoms, diagnostic steps, tools required, and repair procedures.

Affected Component

HVAC

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Wear safety goggles and gloves when handling refrigerants and AC components.

Symptoms

•AC system blowing warm air
•AC compressor not engaging
•Unusual noises from the AC system
•Condenser fan not operating
•Moisture or refrigerant leaks under the vehicle

Diagnostic Steps

1
Check the AC settings to ensure the system is set to 'cool' and the temperature is correctly adjusted.
2
Inspect the AC compressor for engagement by listening for a click sound when the AC is turned on.
3
Use an OBD-II scanner to check for any error codes related to the AC system.
4
Examine the refrigerant levels using a manifold gauge set to determine if the system is low on refrigerant.
5
Inspect the fuses related to the AC system for any blown fuses.
6
Visual inspection of the AC condenser and evaporator for any signs of damage or blockage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Manifold gauge set
•Socket set
•Multimeter
•Safety goggles
•Gloves

Parts Required

•Refrigerant (R-1234yf)
•AC compressor (if necessary)
•AC receiver/drier (if necessary)
•Fuses (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the AC settings to ensure the system is set to 'cool' and the temperature is correctly adjusted.
2
Inspect the AC compressor for engagement by listening for a click sound when the AC is turned on.
3
Use an OBD-II scanner to check for any error codes related to the AC system.
4
Examine the refrigerant levels using a manifold gauge set to determine if the system is low on refrigerant.
5
Inspect the fuses related to the AC system for any blown fuses.
6
Visual inspection of the AC condenser and evaporator for any signs of damage or blockage.

Solution

1. Preparation

Gather tools and parts needed.
Tools Required:
- OBD-II scanner
- Manifold gauge set
- Socket set
- Multimeter
- Safety goggles
- Gloves
Ensure the vehicle is parked on a level surface and the engine is off.

2. Check and Recharge Refrigerant

Sub-steps:
1. Connect the manifold gauge set to the AC service ports (low side and high side).
2. Check the pressure readings; if low, proceed to recharge the system.
3. Using an appropriate refrigerant (R-1234yf for this model), slowly add refrigerant into the low-pressure port until the recommended level is reached.
4. Monitor the pressure on the gauges, ensuring it returns to normal operating levels.

3. Inspect and Replace AC Compressor

Sub-steps:
1. Locate the AC compressor in the engine bay.
2. Disconnect the electrical connector and any hoses connected to the compressor.
3. Remove the mounting bolts using a socket set.
4. Replace the old compressor with a new one and reattach all connections.
5. Ensure to replace the receiver/drier or accumulator as required when replacing the compressor.

4. Check and Replace Fuses

Sub-steps:
1. Locate the fuse box (typically under the dashboard or in the engine compartment).
2. Identify the fuses related to the AC system using the fuse diagram.
3. Remove and inspect the fuses; replace any blown fuses with new ones of the same amperage.

5. Verify Electrical Components

Sub-steps:
1. Use a multimeter to check for voltage at the AC compressor connector when the AC is turned on.
2. If no voltage is present, trace back to the relay and check its operation.
3. Replace any faulty relays or connections as needed.