my Honda CR-V has shaking during braking what's causing it

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

444 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in Honda CR-V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the brakes to cool before working on them to avoid burns.
•Ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

•Vibration felt in the steering wheel during braking
•Pulsation through the brake pedal
•Uneven wear on brake pads
•Noise when braking (grinding or squeaking)
•Vehicle pulls to one side while braking

Diagnostic Steps

1
Inspect brake rotors for warping or scoring using a dial indicator.
2
Check brake pad thickness to ensure they are not excessively worn.
3
Examine suspension components for wear or damage, including control arms and bushings.
4
Verify wheel alignment and balance to rule out related issues.
5
Test for any brake fluid leaks around calipers and brake lines.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•C-clamp
•Jack
•Jack stands

Parts Required

•Brake rotors
•Brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or scoring using a dial indicator.
2
Check brake pad thickness to ensure they are not excessively worn.
3
Examine suspension components for wear or damage, including control arms and bushings.
4
Verify wheel alignment and balance to rule out related issues.
5
Test for any brake fluid leaks around calipers and brake lines.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and the engine is off.

2. Lift the Vehicle

Use a jack to lift the front of the vehicle and secure it with jack stands.
Remove the front wheels with a socket set.

3. Inspect and Replace Brake Rotors

Inspect: Check the condition of the brake rotors for warping or grooves.
Remove: Unbolt the caliper and rotor using appropriate socket sizes.
Replace: Install new rotors, ensuring they are torqued to the manufacturer’s specifications (typically around 80-100 lb-ft).

4. Replace Brake Pads

Remove: Take out the old brake pads from the caliper bracket.
Install: Place new brake pads in the caliper bracket, ensuring proper orientation.
Compress: Use a C-clamp to compress the caliper piston back into the caliper housing.

5. Reassemble and Test

Reattach the caliper over the new brake pads and secure it with bolts.
Reinstall the wheels and lower the vehicle.
Check the brake fluid level and top off if necessary.