why does my Honda CR-V Fifth Generation (2017-2022) AC blow hot air

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

606 words

Problem Statement

Complete guide to fixing AC that blows hot air in Honda CR-V (2017-2022). Includes symptoms, diagnostic steps, tools required, and repair procedures.

Affected Component

HVAC

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before accessing any components.

Symptoms

•AC system blowing warm or hot air
•AC compressor not engaging
•Unusual noises from the AC compressor
•Presence of refrigerant leaks (e.g., oily residue around AC components)
•Decreased airflow from vents
•AC system cycling frequently (on and off)

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any AC-related trouble codes.
2
Verify the refrigerant level using a manifold gauge set to check for proper pressure in the AC system.
3
Inspect the AC compressor visually for signs of damage or leaks.
4
Check the AC fuse in the fuse box to ensure it is not blown.
5
Examine the cabin air filter for clogs or restrictions that could affect airflow.
6
Test the AC pressure switch to confirm it is functioning correctly.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Manifold gauge set
•Socket set
•Torque wrench
•Refrigerant recovery machine
•Safety goggles
•Gloves

Parts Required

•Refrigerant
•Cabin air filter
•AC compressor
•Expansion valve or receiver/dryer

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any AC-related trouble codes.
2
Verify the refrigerant level using a manifold gauge set to check for proper pressure in the AC system.
3
Inspect the AC compressor visually for signs of damage or leaks.
4
Check the AC fuse in the fuse box to ensure it is not blown.
5
Examine the cabin air filter for clogs or restrictions that could affect airflow.
6
Test the AC pressure switch to confirm it is functioning correctly.

Solution

1. Preparation

Gather tools and parts required.
Ensure the vehicle is parked on a flat surface and the engine is turned off.
Disconnect the battery to avoid any electrical issues.

2. Recharge the AC System

Tools Required: Manifold gauge set, refrigerant, safety goggles, gloves.
Connect the manifold gauge set to the low and high-pressure ports of the AC system.
Check the pressure readings. If low, proceed to recharge the system.
With the engine on and the AC set to maximum, add refrigerant until the correct pressure is achieved according to manufacturer specifications.
Monitor pressure readings during the recharging process to avoid overcharging.

3. Replace AC Components (if necessary)

Tools Required: Socket set, torque wrench, refrigerant recovery machine (if replacing compressor).
If the compressor is faulty, disconnect the refrigerant lines from the compressor and remove it by unscrewing the mounting bolts.
Install the new compressor by reversing the removal steps, ensuring all connections are secure.
If the expansion valve or receiver/dryer is replaced, follow the same steps for removal and installation.

4. Check and Replace Cabin Air Filter

Tools Required: None (may require a flathead screwdriver for clips).
Locate the cabin air filter housing, typically behind the glove compartment.
Remove the glove compartment to access the filter.
Check the condition of the filter; replace it if dirty or clogged with debris.

5. Reconnect Battery and Test AC

Reconnect the battery terminal.
Start the engine and turn on the AC to the maximum setting.
Monitor the temperature at the vents to ensure cold air is being produced.