why does my Honda CR-V Fifth Generation (2017-2022) check engine light come on and off

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

530 words

Problem Statement

Learn how to diagnose and fix the intermittent check engine light issue in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide included.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before starting any maintenance work.

Symptoms

•Check engine light illuminated intermittently
•Engine may run rough or misfire
•Decreased fuel efficiency
•Unusual noises from the engine
•Failed emissions test
•Increased exhaust emissions or odor

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify potential issues.
2
Check the condition of the gas cap to ensure it is tight and undamaged.
3
Inspect the engine for any visible leaks or damaged hoses.
4
Verify fuel pressure with a fuel pressure gauge.
5
Check the condition of spark plugs and ignition coils for wear or damage.
6
Inspect the air intake system for blockages or leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Torque wrench
•Fuel pressure gauge
•Socket set
•Screwdrivers

Parts Required

•Spark plugs
•Ignition coils (if needed)
•Gas cap (if damaged)
•Air filter (if needed)
•Fuel filter (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify potential issues.
2
Check the condition of the gas cap to ensure it is tight and undamaged.
3
Inspect the engine for any visible leaks or damaged hoses.
4
Verify fuel pressure with a fuel pressure gauge.
5
Check the condition of spark plugs and ignition coils for wear or damage.
6
Inspect the air intake system for blockages or leaks.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is cool.
Disconnect the negative battery terminal.

2. Address Fault Codes

Sub-step 1: Using the OBD-II scanner, record the fault codes present.
Sub-step 2: Research the codes to determine the relevant components affected.
Sub-step 3: Clear the codes and take the vehicle for a test drive to see if the light returns.

3. Inspect and Replace Faulty Components

Sub-step 1: If codes indicate faulty spark plugs or ignition coils, remove the ignition coil covers.
Sub-step 2: Replace worn or damaged spark plugs with OEM equivalents; torque to manufacturer specifications (usually around 13 lb-ft).
Sub-step 3: Replace any faulty ignition coils if necessary.

4. Check and Replace the Gas Cap

Sub-step 1: Inspect the gas cap for cracks or damage. Replace if necessary.
Sub-step 2: Ensure the new gas cap clicks securely into place to maintain fuel system pressure.

5. Inspect the Air and Fuel Systems

Sub-step 1: Check the air filter for dirt and replace if clogged.
Sub-step 2: Inspect the fuel lines for leaks and ensure all connections are secure.
Sub-step 3: If fuel pressure is low, consider replacing the fuel filter and inspect the fuel pump.