why does my Honda CR-V Fifth Generation (2017-2022) transmission jerk when shifting gears

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

589 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda CR-V (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission fluid system.

Symptoms

•Jerking or lurching sensation during gear changes
•Delay in shifting from one gear to another
•Check engine light illuminated
•Unusual noise during shifting (grinding or clunking)
•Increased fuel consumption
•Transmission fluid leak under the vehicle

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect for any visible leaks around the transmission.
4
Test the transmission fluid pressure using a pressure gauge.
5
Inspect the engine mounts for wear or damage, as faulty mounts can cause jerking.
6
Check the transmission control module (TCM) for proper function and software updates.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid pump
•Socket set
•Torque wrench
•Funnel

Parts Required

•Honda ATF-Z1 or DW-1 transmission fluid
•Transmission filter kit (if applicable)
•Transmission gasket (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect for any visible leaks around the transmission.
4
Test the transmission fluid pressure using a pressure gauge.
5
Inspect the engine mounts for wear or damage, as faulty mounts can cause jerking.
6
Check the transmission control module (TCM) for proper function and software updates.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the negative battery terminal for safety.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid pump, funnel, socket set, torque wrench.
Instructions:
1. Remove the transmission fluid dipstick and check fluid level.
2. If low, drain the old fluid from the transmission pan using the drain plug.
3. Replace the transmission fluid with the manufacturer-recommended fluid type (Honda ATF-Z1 or DW-1).
4. Reinstall the drain plug and torque it to specifications (typically around 20 lb-ft).
5. Use a funnel to refill the transmission through the dipstick tube.
6. Start the engine, cycle through the gears, and recheck fluid level. Add fluid as necessary.

3. Inspect and Replace Transmission Filter (if applicable)

Tools Required: Socket set, torque wrench, transmission filter kit (if applicable).
Instructions:
1. Remove the transmission pan using a socket set, taking care to catch any fluid.
2. Inspect the old filter and replace it with a new one if blocked or worn.
3. Clean the transmission pan and magnet (if equipped) to remove any debris.
4. Reinstall the pan, ensuring the gasket is properly seated, and torque bolts to specifications.

4. Reprogram Transmission Control Module (if necessary)

Tools Required: OBD-II scanner capable of TCM reprogramming.
Instructions:
1. Connect the OBD-II scanner to the vehicle's diagnostic port.
2. Follow the manufacturer's instructions to reprogram or update the TCM software.
3. Clear any existing error codes and perform a test drive to verify smooth shifting.