why is my Honda CR-V Fifth Generation (2017-2022) making a clicking noise?

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

470 words

Problem Statement

Learn how to diagnose and fix clicking noise in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Ensure vehicle is securely supported on jack stands before working underneath.

Symptoms

•Clicking noise when accelerating or decelerating
•Noise increases with vehicle speed
•Possible vibration in the steering wheel
•Unusual noises when turning
•Check engine light illuminated (if applicable)

Diagnostic Steps

1
Inspect the wheels and tires for any foreign objects or damage.
2
Check the CV joints and boots for signs of wear or failure.
3
Examine the suspension components for loose or damaged parts.
4
Test the engine and transmission mounts for wear.
5
Listen closely to identify the location of the noise during a test drive.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Pliers
•Socket set
•Torque wrench

Parts Required

•CV joint or boot (if damaged)
•Suspension components (if worn)
•Engine or transmission mount (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the wheels and tires for any foreign objects or damage.
2
Check the CV joints and boots for signs of wear or failure.
3
Examine the suspension components for loose or damaged parts.
4
Test the engine and transmission mounts for wear.
5
Listen closely to identify the location of the noise during a test drive.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface, engage the parking brake, and disconnect the battery.
Wear safety gloves and goggles for protection.

2. Inspect Wheels and Tires

Sub-steps:
- Remove the wheel covers or hubcaps if applicable.
- Check the tread for uneven wear or embedded stones.
- Spin each wheel to see if noise occurs when not under load.
Tools Required: Jack, jack stands, lug wrench.

3. Examine CV Joints and Boots

Sub-steps:
- Remove the wheel to access the CV axle.
- Inspect the CV boot for cracks or leaks; replace if damaged.
- Check the CV joint for excessive play or noise.
Tools Required: Pliers, socket set.

4. Check Suspension Components

Sub-steps:
- Visually inspect control arms, struts, and bushings for wear.
- Shake the suspension components to check for any excessive movement or noise.
- Tighten any loose bolts and replace any damaged parts.
Tools Required: Socket set, torque wrench.

5. Inspect Engine and Transmission Mounts

Sub-steps:
- Locate the engine and transmission mounts.
- Inspect for cracks, splits, or excessive wear.
- Replace any failing mounts to eliminate noise.
Tools Required: Socket set, possibly a pry bar for leverage.