how can I fix my Honda CR-V Fifth Generation (2017-2022) that shakes while braking?

Honda CR-V 6th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

558 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to fix shaking while braking in Honda CR-V (2017-2022). Step-by-step guide with diagnostic steps, tools, and parts required.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the braking system.
•Ensure the vehicle is securely lifted and supported before working underneath.

Symptoms

•Steering wheel shakes when braking
•Vibration felt in the brake pedal
•Uneven tire wear
•Grinding or squeaking noise during braking
•Brake warning light may illuminate

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for wear and remaining thickness.
3
Examine suspension components (e.g., control arms, bushings) for wear or damage.
4
Check tire balance and alignment using a wheel balancer and alignment machine.
5
Inspect wheel bearings for play or noise during rotation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Socket set
•Torque wrench
•Bungee cord (for caliper support)
•Brake grease

Parts Required

•New brake rotors
•New brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for wear and remaining thickness.
3
Examine suspension components (e.g., control arms, bushings) for wear or damage.
4
Check tire balance and alignment using a wheel balancer and alignment machine.
5
Inspect wheel bearings for play or noise during rotation.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Disconnect the negative battery terminal for safety.

2. Replace Brake Rotors

Remove the Wheel:
- Use a lug wrench to loosen the lug nuts before lifting the vehicle with a jack.
- Securely position jack stands and then remove the lug nuts and wheel.
Remove Brake Caliper:
- Use a socket set to remove the caliper mounting bolts.
- Carefully hang the caliper using a bungee cord to avoid stressing the brake line.
Remove Brake Pads:
- Slide out the brake pads from the caliper bracket for inspection and replacement.
Remove Old Rotor:
- If applicable, remove the rotor retaining screws with a screwdriver.
- Slide the rotor off the wheel hub. If stuck, gently tap with a rubber mallet.
Install New Rotor:
- Position the new rotor onto the wheel hub and secure with retaining screws if applicable.

3. Replace Brake Pads

Install New Brake Pads:
- Apply brake grease to the back of the new pads and slide them into the caliper bracket.
Reattach Brake Caliper:
- Position the caliper back over the new pads and secure it with the previously removed bolts. Torque to manufacturer specifications (usually around 25-35 lb-ft).

4. Reassemble Wheel

Reinstall the wheel on the hub, hand-tighten the lug nuts, and lower the vehicle.
Torque the lug nuts to manufacturer specifications (typically 80-100 lb-ft).

5. Final Checks

Reconnect the negative battery terminal.
Pump the brake pedal to seat the pads against the rotor.
Test drive the vehicle to ensure the issue is resolved.