FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix Honda CR-V Fifth Generation (2017-2022) that won't go into gear - Honda CR-V
Home/Cars/Honda/CR-V/6th Gen (2023-Present)/how to fix Honda CR-V Fifth Generation (2017-2022) that won't go into gear

how to fix Honda CR-V Fifth Generation (2017-2022) that won't go into gear

Honda CR-V 6th Gen (2023-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
592 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow the engine to cool before opening the transmission fluid fill cap.

Symptoms

  • •Transmission warning light illuminated on the dashboard
  • •Engine revs without acceleration
  • •Grinding noise when attempting to shift gears
  • •Fluid leaks under the vehicle
  • •Unresponsive shifter when attempting to change gears

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Screwdrivers
  • •Drain pan
  • •Fluid pump

Parts Required

  • •Honda Automatic Transmission Fluid (ATF)
  • •Transmission filter
  • •Shifter cable (if necessary)
  • •Transmission control module (if necessary)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Ensure the vehicle is parked on a level surface and engage the parking brake.
  • Disconnect the battery to avoid electrical shorts or shocks.
2. Check Transmission Fluid
  • Locate the transmission dipstick and remove it.
  • Wipe it clean, reinsert it, and check the fluid level.
  • If low, add the appropriate Honda ATF (Automatic Transmission Fluid) until the correct level is reached.
  • If fluid is dirty or burnt, proceed to change the fluid.
3. Change Transmission Fluid (if necessary)
  • Place a drain pan under the transmission pan.
  • Remove the drain plug or pan bolts to drain old fluid completely.
  • Replace the drain plug and torque to the manufacturer's specifications (typically around 7-9 lb-ft).
  • Remove the transmission filter and replace it with a new one.
  • Refill the transmission with new Honda ATF through the dipstick tube.
  • Start the engine and let it run for a few minutes while checking for leaks.
4. Inspect and Repair Shifter Linkage
  • Remove the center console cover to access the shifter assembly.
  • Inspect the shifter cable for any signs of wear or disconnection.
  • If damaged, replace the shifter cable with a new one.
  • Ensure proper adjustment so that the gear lever aligns correctly with the transmission.
5. Check Electrical Connections
  • Reconnect the battery and check all electrical connections to the transmission and TCM.
  • Inspect the TCM for any visible damage or corrosion.
  • If necessary, replace the TCM and reprogram it using a compatible scan tool.