FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix P0174 code in Honda CR-V Fifth Generation (2017-2022) - Honda CR-V
Home/Cars/Honda/CR-V/6th Gen (2023-Present)/how to fix P0174 code in Honda CR-V Fifth Generation (2017-2022)

how to fix P0174 code in Honda CR-V Fifth Generation (2017-2022)

Honda CR-V 6th Gen (2023-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Error Code: P0174
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
556 words

Problem Statement

Learn how to diagnose and fix P0174 fuel system issue in Honda CR-V (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0174
Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting any components related to the fuel system.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or poor acceleration
  • •Decreased fuel economy
  • •Engine stalling or hesitation during acceleration
  • •Increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Vacuum gauge
  • •Fuel pressure gauge
  • •MAF cleaner
  • •Socket set
  • •Screwdriver

Parts Required

  • •MAF sensor (if found faulty)
  • •Vacuum hoses (if cracked or damaged)
  • •Fuel filter (if clogged)

Additional Information

Error Code
P0174
Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed.
  • Disconnect the negative battery terminal to prevent any electrical shorts.
2. Inspect and Repair Vacuum Leaks
  • Tools Required: Vacuum gauge, hose clamps, socket set
  • Inspect all vacuum hoses connected to the intake manifold for cracks or disconnections.
  • Use a vacuum gauge to test for leaks. Replace any damaged hoses.
  • Reconnect any loose connections and tighten hose clamps as necessary.
3. Clean or Replace MAF Sensor
  • Tools Required: MAF cleaner, screwdriver
  • Locate the MAF sensor in the air intake duct.
  • Disconnect the electrical connector and unscrew the MAF from the duct.
  • Clean the MAF sensor with MAF cleaner and allow to dry. If damaged, replace it with a new unit.
4. Check Fuel Pressure
  • Tools Required: Fuel pressure gauge
  • Locate the fuel rail and connect the fuel pressure gauge.
  • Turn the ignition to the "ON" position (do not start the engine) to check the fuel pressure reading.
  • Ensure the fuel pressure is within specifications (typically around 50-60 psi for the CR-V). If pressure is low, inspect the fuel pump and filter.
5. Inspect Fuel Injectors
  • Tools Required: Injector cleaner, socket set
  • Remove the fuel rail to access the fuel injectors.
  • Inspect injectors for clogs; use injector cleaner to clean them if necessary.
  • Reinstall the injectors and rail, ensuring all connections are secure.
6. Reassemble and Reconnect
  • Reinstall any components removed during the inspection.
  • Reconnect the negative battery terminal.