how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V 6th Gen (2023-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

384 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022) with this step-by-step guide. Simple and quick process.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' mode before starting this process.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Service reminder message displayed
•No other engine-related warning lights are present
•No performance issues or symptoms related to the engine

Diagnostic Steps

1
Ensure the vehicle is parked and the engine is turned off.
2
Press the 'Start' button without pressing the brake pedal to turn the ignition to the 'ON' position.
3
Navigate to the 'Settings' menu on the dashboard display.
4
Select 'Maintenance' from the settings options.
5
Choose 'Oil Life' and then select 'Reset' to clear the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked and the engine is turned off.
2
Press the 'Start' button without pressing the brake pedal to turn the ignition to the 'ON' position.
3
Navigate to the 'Settings' menu on the dashboard display.
4
Select 'Maintenance' from the settings options.
5
Choose 'Oil Life' and then select 'Reset' to clear the maintenance light.

Solution

1. Preparation

Gather necessary tools:
- None required for this process.
Ensure the vehicle is parked on a flat surface.

2. Turn on Ignition

Sit in the driver’s seat and ensure all doors are closed.
Press the "Start" button without pressing the brake pedal to enter the "ON" position (do not start the engine).

3. Access Maintenance Settings

Use the dashboard controls to navigate to the "Settings" menu on the display screen.
Scroll down to find and select "Maintenance".

4. Reset Oil Life

Inside the "Maintenance" menu, select "Oil Life".
Confirm the reset by selecting "Reset".
A prompt will appear. Select "Yes" to confirm the reset of the maintenance light.

5. Turn Off Ignition

Turn the ignition off by pressing the "Start" button again.
Wait a few seconds, then turn the ignition back on to ensure the maintenance light is no longer illuminated.