how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V 6th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

356 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position during the reset process.

Symptoms

•Maintenance light is illuminated on the dashboard
•No other warning lights are present
•Owner has completed maintenance service (e.g., oil change, tire rotation)

Diagnostic Steps

1
Ensure that the vehicle is turned off and in the park position.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Press the gas pedal three times within 5 seconds to initiate the reset process.
4
Check the maintenance light status after the reset attempt.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools: none required for the reset process, just the vehicle key.

2. Ignition Position

Turn the ignition key to the "ON" position (do not start the engine).
Confirm that all dashboard lights illuminate.

3. Gas Pedal Action

Within 5 seconds, press the gas pedal down fully three times.
Ensure that the gas pedal is fully pressed each time for the reset to be effective.

4. Check Maintenance Light

After the third press, turn the ignition off and then back to "ON".
Confirm that the maintenance light has turned off.

5. Complete Process

If the light remains on, repeat steps 2 to 4.
If it still does not reset, consult the vehicle manual for further troubleshooting.