how to troubleshoot the cruise control not working in my Honda CR-V Fifth Generation (2017-2022)

Honda CR-V 6th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

593 words

Problem Statement

Learn how to troubleshoot and fix cruise control issues in Honda CR-V (2017-2022). Step-by-step guide with diagnostic steps and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before performing any inspections or repairs.

Symptoms

•Cruise control indicator light not illuminating on the dashboard
•Inability to set or adjust cruise speed
•Cruise control disengages unexpectedly
•No response from the cruise control buttons
•Engine revs without maintaining set speed when engaged

Diagnostic Steps

1
Inspect the cruise control switch on the steering wheel for any visible damage or foreign objects.
2
Check the brake pedal position switch to ensure it is functioning correctly.
3
Scan the vehicle's onboard computer for any error codes related to the cruise control system using an OBD-II scanner.
4
Verify the vehicle speed sensor operation by checking the speedometer functionality.
5
Inspect the fuses related to the cruise control system for continuity and functionality.
6
Examine the throttle position sensor for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Basic hand tools

Parts Required

•Cruise control switch (if damaged)
•Brake pedal position switch (if faulty)
•Vehicle speed sensor (if defective)
•Fuses (if blown)
•Throttle position sensor (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the cruise control switch on the steering wheel for any visible damage or foreign objects.
2
Check the brake pedal position switch to ensure it is functioning correctly.
3
Scan the vehicle's onboard computer for any error codes related to the cruise control system using an OBD-II scanner.
4
Verify the vehicle speed sensor operation by checking the speedometer functionality.
5
Inspect the fuses related to the cruise control system for continuity and functionality.
6
Examine the throttle position sensor for proper operation.

Solution

1. Preparation

Tools Required: OBD-II scanner, multimeter, basic hand tools.
Disconnect the negative terminal of the battery to ensure safety.

2. Inspect Cruise Control Switch

Remove the airbag cover from the steering wheel using a T30 Torx screwdriver (ensure the battery is disconnected before this step).
Check the cruise control switch for any signs of damage or disconnection.
If damaged, replace the cruise control switch.

3. Test Brake Pedal Position Switch

Locate the brake pedal position switch.
Use a multimeter to check for continuity when the brake pedal is pressed.
If the switch is faulty, replace it with a new one.

4. Scan for Error Codes

Connect the OBD-II scanner to the vehicle's diagnostic port.
Read any stored error codes and note them for further troubleshooting.
Clear the codes and test the cruise control system again to see if the issue persists.

5. Check Vehicle Speed Sensor

Verify the speedometer functionality to ensure the speed sensor is working.
If the speedometer is not functioning, inspect the vehicle speed sensor for disconnection or damage.
Replace the speed sensor if it shows signs of failure.

6. Inspect Fuses

Locate the fuse box and identify the fuses related to the cruise control system.
Remove the fuses and check for continuity using a multimeter.
Replace any blown fuses with the correct amperage.

7. Examine Throttle Position Sensor

Disconnect the throttle position sensor connector.
Use a multimeter to check the resistance values and ensure they fall within the specified range.
If faulty, replace the throttle position sensor.