FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda CR-V Fifth Generation (2017-2022) makes a whining noise when turning, why - Honda CR-V
Home/Cars/Honda/CR-V/6th Gen (2023-Present)/my Honda CR-V Fifth Generation (2017-2022) makes a whining noise when turning, why

my Honda CR-V Fifth Generation (2017-2022) makes a whining noise when turning, why

Honda CR-V 6th Gen (2023-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
585 words

Problem Statement

Learn how to diagnose and fix whining noise when turning in Honda CR-V 2017-2022. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the power steering reservoir.

Symptoms

  • •Whining noise during left or right turns
  • •Difficulty in steering at low speeds
  • •Fluid leakage around the power steering pump
  • •Increase in steering effort required
  • •Noises may become louder with sharper turns

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fluid catch pan
  • •Funnel
  • •Flashlight
  • •Gloves
  • •Socket set
  • •Wrench set
  • •Torque wrench

Parts Required

  • •Power steering fluid
  • •Power steering pump (if replacement is needed)
  • •Power steering hoses (if damaged)

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, fluid catch pan, funnel, flashlight, gloves.
  • Park the vehicle on a flat surface and turn off the engine. Ensure the steering wheel is in a neutral position.
  • Wear gloves for safety and cleanliness.
2. Check and Refill Power Steering Fluid
  • Locate the power steering fluid reservoir.
  • Remove the cap and check the fluid level. If low, proceed to the next step.
  • Use a funnel to add the appropriate power steering fluid (refer to the owner’s manual for the correct type).
  • Replace the cap securely after filling.
3. Inspect Power Steering Components
  • Visually inspect the power steering pump for leaks or damage.
  • Check the hoses for any signs of wear, cracking, or leakage.
  • Ensure all connections are tight and there are no kinks in the hoses.
4. Replace Power Steering Pump (if necessary)
  • Tools Required: Socket set, wrench set, torque wrench.
  • Disconnect the battery to prevent electrical shorts.
  • Remove any components obstructing access to the power steering pump.
  • Disconnect the power steering lines from the pump (be prepared for fluid spillage).
  • Unbolt the power steering pump from its mounting bracket and remove it.
  • Install the new power steering pump, ensuring it is properly aligned.
  • Reconnect the power steering lines and torque them to manufacturer specifications.
5. Reinstall Components and Test
  • Reinstall any components removed to access the power steering pump.
  • Reconnect the battery.
  • Start the engine and check for proper operation.
  • Turn the steering wheel left and right to verify the noise is eliminated.