my Honda CR-V Fifth Generation (2017-2022) shakes when I brake what could be the problem

Honda CR-V 6th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

488 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely elevated on jack stands before working underneath.
•Allow the brakes to cool before handling brake components to avoid burns.

Symptoms

•Shaking or vibration felt through the steering wheel when braking
•Pulsation in the brake pedal
•Uneven wear on brake pads
•Increased stopping distance
•Noise during braking (squeaking or grinding)

Diagnostic Steps

1
Inspect brake pads for wear and tear; measure remaining thickness.
2
Check rotors for warping using a dial indicator or by measuring runout.
3
Examine brake calipers for proper operation and any signs of sticking.
4
Inspect suspension components (e.g., tie rods, ball joints) for wear that could contribute to shaking.
5
Check tire balance and alignment to rule out tire-related issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Torque wrench
•Dial indicator
•Caliper tool
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and tear; measure remaining thickness.
2
Check rotors for warping using a dial indicator or by measuring runout.
3
Examine brake calipers for proper operation and any signs of sticking.
4
Inspect suspension components (e.g., tie rods, ball joints) for wear that could contribute to shaking.
5
Check tire balance and alignment to rule out tire-related issues.

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, torque wrench, dial indicator, caliper tool, brake cleaner.
Raise the vehicle securely on jack stands and remove the wheels for access to the brake components.

2. Inspect and Replace Brake Pads

Sub-steps:
1. Remove caliper bolts using a socket set and slide the caliper off the rotor.
2. Remove the old brake pads from the caliper bracket.
3. Inspect the brake pad backing for uneven wear and replace if necessary.
4. Apply brake grease to the back of the new pads and install them into the caliper bracket.

3. Inspect and Resurface/Replace Rotors

Sub-steps:
1. Measure rotor thickness; if below specification, replace rotors.
2. If within specification, check for warping with a dial indicator.
3. If warped, either replace the rotor or resurface it according to manufacturer's specifications.
4. Clean the rotor surface with brake cleaner before reinstallation.

4. Reassemble Braking Components

Sub-steps:
1. Reinstall the caliper over the new pads and rotor.
2. Torque the caliper bolts to the manufacturer's specifications (typically around 25-35 ft-lbs).
3. Reinstall the wheels and lower the vehicle.

5. Final Checks

Sub-steps:
1. Pump the brake pedal to seat the pads against the rotors.
2. Check brake fluid level and top up if necessary.