Honda CR-V Fifth Generation (2017-2022) check engine light keeps coming on what to do

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

578 words

Problem Statement

Learn how to diagnose and fix the check engine light issue in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening any components.

Symptoms

•Check engine light illuminated
•Engine runs rough or misfires
•Decreased fuel efficiency
•Poor acceleration or power loss
•Unusual engine noises (e.g., knocking or pinging)
•Increased emissions or failed emissions test

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check fluid levels (engine oil, coolant, transmission fluid) to ensure they are within specifications.
3
Inspect the air filter for clogs or restrictions that could affect engine performance.
4
Examine the fuel system for leaks or blockages, including the fuel pump and fuel injectors.
5
Test the ignition system components (spark plugs, ignition coils) for wear or failure.
6
Inspect the exhaust system for leaks or blockages, especially the catalytic converter.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Screwdrivers
•Fuel injector cleaning kit

Parts Required

•Spark plugs
•Air filter
•Fuel injectors (if applicable)
•Catalytic converter (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check fluid levels (engine oil, coolant, transmission fluid) to ensure they are within specifications.
3
Inspect the air filter for clogs or restrictions that could affect engine performance.
4
Examine the fuel system for leaks or blockages, including the fuel pump and fuel injectors.
5
Test the ignition system components (spark plugs, ignition coils) for wear or failure.
6
Inspect the exhaust system for leaks or blockages, especially the catalytic converter.

Solution

1. Preparation

Gather required tools and parts before starting the repair.
Ensure the vehicle is parked on a level surface, and the engine is cool.
Disconnect the battery to prevent any electrical shorts while working.

2. Addressing Error Codes

Connect the OBD-II scanner to the vehicle's diagnostic port.
Retrieve and document any error codes.
Research the codes to determine potential causes and required repairs.

3. Replace Faulty Components

Ignition System:
- If spark plugs are faulty, remove the ignition coils using a socket set.
- Replace old spark plugs with new ones (ensure correct gap).
- Reinstall ignition coils and secure with specified torque.
Air Filter Replacement:
- Remove the air intake cover.
- Take out the old air filter and replace with a new one.
- Reassemble the air intake cover.
Fuel System Cleaning:
- If fuel injectors are clogged, use a fuel injector cleaning kit or replace them if necessary.
- Follow the manufacturer's procedures for cleaning or replacing injectors.

4. Exhaust System Inspection

Check for any visible signs of damage or leaks in the exhaust system.
If the catalytic converter is found to be faulty, replace it according to manufacturer specifications.

5. Reconnect Battery and Clear Codes

Reconnect the battery terminals securely.
Use the OBD-II scanner to clear any stored trouble codes.

6. Test Drive

Start the engine and allow it to idle for a few minutes.
Take the vehicle for a test drive to ensure the check engine light remains off and that the vehicle operates smoothly.