Honda CR-V Fifth Generation (2017-2022) interior lights won't turn off how to fix

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

536 words

Problem Statement

Learn how to diagnose and fix the issue of interior lights not turning off in Honda CR-V (2017-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent shocks or shorts.

Symptoms

•Interior lights remain illuminated even after doors are closed.
•Dome light stays on when the vehicle is turned off.
•Battery drains quickly, requiring frequent jump-starts.
•Warning message on the dashboard indicating a door is ajar.
•The manual switch for the interior lights does not function properly.

Diagnostic Steps

1
Check the door ajar switch for malfunction by inspecting each door.
2
Test the interior light switch to ensure it is not stuck in the 'on' position.
3
Use an OBD-II scanner to check for any fault codes related to the body control module.
4
Inspect the wiring harness for any damaged or frayed wires that could cause a short circuit.
5
Test the battery voltage to ensure it is not weak, which can cause electronics to behave erratically.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Multimeter
•OBD-II scanner
•Screwdriver set

Parts Required

•Door ajar switch (if faulty)
•Interior light switch (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Interior lights remain illuminated even after doors are closed.

•Dome light stays on when the vehicle is turned off.

•Battery drains quickly, requiring frequent jump-starts.

•Warning message on the dashboard indicating a door is ajar.

•The manual switch for the interior lights does not function properly.

Diagnostic Steps

1
Check the door ajar switch for malfunction by inspecting each door.
2
Test the interior light switch to ensure it is not stuck in the 'on' position.
3
Use an OBD-II scanner to check for any fault codes related to the body control module.
4
Inspect the wiring harness for any damaged or frayed wires that could cause a short circuit.
5
Test the battery voltage to ensure it is not weak, which can cause electronics to behave erratically.

Solution

1. Preparation

Gather necessary tools: socket set, multimeter, and OBD-II scanner.
Ensure the vehicle is parked on a level surface and the ignition is off.
Disconnect the negative terminal of the battery to prevent electrical shock.

2. Inspect Door Ajar Switches

Remove the door panel of each door (driver, passenger, rear) using a socket set.
Locate the door ajar switch, usually mounted on the door latch mechanism.
Test each switch with a multimeter to ensure it opens and closes correctly when the door is opened and closed.
If defective, replace the door ajar switch with a new part.

3. Check Interior Light Switch

Locate the interior light switch, typically found on the overhead console.
Remove the overhead console using a socket set or screwdriver, depending on the design.
Inspect the switch for any signs of sticking or damage; test with a multimeter.
If faulty, replace the interior light switch.

4. Examine Wiring and Connectors

Visually inspect the wiring harness connected to the interior lights and door switches.
Look for any signs of wear, fraying, or exposed wires.
Repair any damaged wiring with electrical tape or replace sections as necessary.

5. Reconnect Battery and Test

Reconnect the negative terminal of the battery.
Test the interior lights by closing all doors and checking if they turn off automatically.
If the issue persists, further diagnostic with an OBD-II scanner may be necessary.