Honda CR-V Fifth Generation (2017-2022) transmission slipping when accelerating what to do

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

476 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the electrical system.
•Allow the engine to cool before working on the transmission to avoid burns.

Symptoms

•Transmission slips or hesitates when accelerating
•Unusual engine revving without corresponding vehicle speed increase
•Check engine light illuminated
•Delayed engagement when shifting from park to drive/reverse
•Fluid leaks under the vehicle
•Burning smell from the transmission area

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes related to the transmission.
2
Check the transmission fluid level and condition; look for discoloration or burnt odor.
3
Inspect the transmission fluid lines and pan for any signs of leaks.
4
Test the transmission solenoids using a multimeter for proper resistance values.
5
Evaluate the condition of the transmission filter if accessible.
6
Check for any software updates or recalls related to the transmission system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Transmission fluid pump

Parts Required

•Honda ATF DW-1 transmission fluid
•Transmission filter
•Transmission solenoids (if needed)
•Gasket for transmission pan (if required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes related to the transmission.
2
Check the transmission fluid level and condition; look for discoloration or burnt odor.
3
Inspect the transmission fluid lines and pan for any signs of leaks.
4
Test the transmission solenoids using a multimeter for proper resistance values.
5
Evaluate the condition of the transmission filter if accessible.
6
Check for any software updates or recalls related to the transmission system.

Solution

1. Preparation

Gather necessary tools and parts.
Raise the vehicle securely on jack stands.
Disconnect the battery to ensure safety.

2. Fluid Change

Sub-steps:
1. Remove the transmission pan using a socket set; drain the old fluid into a suitable container.
2. Replace the transmission filter if applicable; ensure the gasket is clean and replace if necessary.
3. Reinstall the pan and tighten bolts to the manufacturer’s torque specifications (typically 10-12 ft-lbs).
4. Refill the transmission with the appropriate fluid type (Honda ATF DW-1) through the dipstick tube.

3. Solenoid Replacement (if faulty)

Sub-steps:
1. Locate the transmission solenoids and disconnect the electrical connectors.
2. Remove the retaining bolts and take out the faulty solenoid.
3. Install the new solenoid and secure it with the retaining bolts; reconnect the electrical connectors.

4. Software Update (if required)

Sub-steps:
1. Connect the vehicle to a compatible Honda diagnostic scanner.
2. Check for any available software updates for the transmission control module.
3. Follow the on-screen instructions to apply the update if necessary.