how to check for leaking struts on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

425 words

Problem Statement

Learn how to check for leaking struts on Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and safety tips.

Affected Component

Suspension

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a lifted vehicle.
•Ensure the vehicle is securely on a flat surface before lifting.

Symptoms

•Visible oil on the strut housing
•Fluid dripping from the strut assembly
•Uneven tire wear
•Vehicle swaying or bouncing excessively during driving
•Noise from the suspension when driving over bumps

Diagnostic Steps

1
Lift the vehicle using a jack and secure it with jack stands.
2
Visually inspect the strut assembly for any signs of fluid leakage.
3
Check the dust covers on the struts for cracks or damage that might indicate wear.
4
Perform a bounce test by pushing down on the front or rear of the vehicle and observing how the vehicle responds.
5
Inspect the area around the strut mounts for any signs of fluid accumulation or corrosion.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Torque wrench
•Socket set
•Clean cloth for inspection

Parts Required

•Replacement struts (if leaks are found)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Lift the vehicle using a jack and secure it with jack stands.
2
Visually inspect the strut assembly for any signs of fluid leakage.
3
Check the dust covers on the struts for cracks or damage that might indicate wear.
4
Perform a bounce test by pushing down on the front or rear of the vehicle and observing how the vehicle responds.
5
Inspect the area around the strut mounts for any signs of fluid accumulation or corrosion.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a flat surface.
Wear safety goggles and gloves.

2. Lift the Vehicle

Use a jack to lift the front or rear of the vehicle, depending on which strut you are inspecting.
Place jack stands securely under the vehicle’s frame for safety.

3. Inspect the Struts

Visually examine the strut for oil residue or fluid leaks.
Check the strut boot (dust cover) for any tears or damage.
Use a cloth to wipe down the strut rod to see if any new fluid emerges.

4. Perform Bounce Test

Push down hard on the front or rear of the vehicle.
Observe how many times it bounces. A well-functioning strut should rebound once and settle.

5. Document Findings

Take notes or photographs of any visible leaks or damages.
If leaks are found, prepare for strut replacement.