how to reset the tire pressure light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

449 words

Problem Statement

Learn how to reset the tire pressure light on Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat, stable surface before checking or adjusting tire pressures.

Symptoms

•Tire pressure warning light is illuminated on the dashboard
•Tire pressure readings are normal when checked manually
•Warning light does not turn off after adjusting tire pressures
•Possible fluctuation in tire pressure readings on the dashboard display

Diagnostic Steps

1
Verify the current tire pressures using a tire pressure gauge.
2
Check for any visible damage or leaks in the tires.
3
Inspect the tire pressure monitoring system (TPMS) sensors for any faults.
4
Confirm that all tires, including the spare (if equipped with a sensor), are inflated to the recommended levels.
5
Consult the vehicle's manual for specific reset instructions for the TPMS.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner (optional)

Parts Required

•TPMS sensors (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify the current tire pressures using a tire pressure gauge.
2
Check for any visible damage or leaks in the tires.
3
Inspect the tire pressure monitoring system (TPMS) sensors for any faults.
4
Confirm that all tires, including the spare (if equipped with a sensor), are inflated to the recommended levels.
5
Consult the vehicle's manual for specific reset instructions for the TPMS.

Solution

1. Preparation

Ensure all tires are inflated to the manufacturer's recommended pressures (found on the driver’s side door jamb).
Gather necessary tools: tire pressure gauge and OBD-II scanner (optional for advanced diagnostics).

2. Reset the TPMS

Ignition Position: Insert the key and turn the ignition to the "ON" position without starting the engine.
TPMS Reset Button: Locate the TPMS reset button, usually found beneath the steering wheel or in the glove compartment.
Press and Hold: Press and hold the TPMS reset button until the TPMS indicator blinks three times, then release the button.
Wait for Confirmation: Leave the ignition in the "ON" position for a few minutes. The TPMS light should blink and then turn off, indicating a successful reset.

3. Verify Sensor Function

Drive the Vehicle: Drive the car at speeds above 30 mph for approximately 10-15 minutes. This will allow the TPMS system to calibrate and confirm proper sensor readings.
Check Dashboard: Observe if the tire pressure light remains off after the drive.