how to reset the tire pressure monitor on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

380 words

Problem Statement

Learn how to reset the TPMS warning light on your Honda CR-V (2017-2022) with this step-by-step guide. Ensure safety and proper tire pressure.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure tires are at the correct pressure before performing the reset to avoid driving with under-inflated tires.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inconsistent tire pressure readings on the dashboard display
•Tire pressure gauge readings are normal but warning persists

Diagnostic Steps

1
Check the tire pressures of all tires, including the spare, and adjust them to the recommended levels.
2
Turn the ignition switch to the 'ON' position without starting the engine.
3
Locate the TPMS reset button, typically found under the steering column or to the left of the dashboard.
4
Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
5
Start the engine and let the vehicle run for a few minutes, ensuring that the TPMS light turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required.

Parts Required

•None specifically required unless sensors need replacement.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressures of all tires, including the spare, and adjust them to the recommended levels.
2
Turn the ignition switch to the 'ON' position without starting the engine.
3
Locate the TPMS reset button, typically found under the steering column or to the left of the dashboard.
4
Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
5
Start the engine and let the vehicle run for a few minutes, ensuring that the TPMS light turns off.

Solution

1. Preparation

Gather necessary tools: no specific tools are required for the reset process.
Ensure that all tires are inflated to the manufacturer’s recommended pressure.

2. Locate the TPMS Reset Button

Position yourself in the driver’s seat.
Look under the steering column or to the left of the dashboard to find the TPMS reset button.

3. Reset the TPMS

Turn the ignition switch to the "ON" position without starting the engine.
Press and hold the TPMS reset button until the TPMS indicator light blinks three times, then release the button.

4. Verify the Reset

Start the engine and let it run for a few minutes. Check that the TPMS warning light has turned off.