FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda CR-V Fifth Generation (2017-2022) keeps stalling while driving what should I check - Honda CR-V
Home/Cars/Honda/CR-V/Sixth Generation (2023-present)/my Honda CR-V Fifth Generation (2017-2022) keeps stalling while driving what should I check

my Honda CR-V Fifth Generation (2017-2022) keeps stalling while driving what should I check

Honda CR-V Sixth Generation (2023-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
539 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine stalling issues in Honda CR-V (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on any components.

Symptoms

  • •Engine stalls unexpectedly during driving
  • •Check engine light illuminated
  • •Rough idle when the engine is running
  • •Loss of power during acceleration
  • •Difficulty restarting the engine after stalling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Fuel pressure gauge
  • •Cleaning supplies

Parts Required

  • •Fuel pump (if needed)
  • •Fuel filter (if needed)
  • •Spark plugs (if needed)
  • •Ignition coils (if needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, socket set, multimeter, fuel pressure gauge, cleaning supplies.
  • Safety Warning: Disconnect the battery before working on electrical systems.
2. Address Fuel System Issues

  1. Inspect Fuel Pump:

    • Listen for the fuel pump operation sound when the ignition is turned on.
    • Use a fuel pressure gauge to check if the fuel pump is delivering adequate pressure (typically 30-40 psi for CR-V).
    • If pressure is low, replace the fuel pump.

  2. Replace Fuel Filter:

    • Locate the fuel filter (usually near the fuel tank or on the fuel line).
    • Relieve fuel system pressure by removing the fuel pump fuse and running the engine until it stalls.
    • Disconnect fuel lines and remove the old filter.
    • Install the new filter, ensuring the flow direction is correct.
3. Check Ignition System

  1. Inspect Spark Plugs:

    • Remove spark plugs using a socket wrench.
    • Check for wear or fouling; replace if necessary.
    • Use a gap tool to ensure proper gap size (should be around 0.044 inches).

  2. Test Ignition Coils:

    • Use a multimeter to check the resistance of ignition coils.
    • Replace coils that are outside the manufacturer's specified range.
4. Clean Throttle Body

  1. Remove Throttle Body:

    • Disconnect the air intake duct and electrical connectors.
    • Unbolt the throttle body from the intake manifold.

  2. Clean the Throttle Body:

    • Use throttle body cleaner and a soft brush to remove carbon deposits.
    • Reassemble the throttle body and reconnect all components.