what does the C0035 code mean for my Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: C0035

3 min read

487 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C0035 wheel speed sensor issues in Honda CR-V (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

C0035

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a level surface, engage the parking brake, and use wheel chocks.
•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before working on brake components.

Symptoms

•ABS warning light illuminated
•Traction control light activated
•Unresponsive anti-lock braking system (ABS)
•Inconsistent speedometer readings
•Potential loss of traction control functionality

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm C0035 is present.
2
Inspect the wheel speed sensor wiring and connector for damage or corrosion.
3
Measure the resistance of the left front wheel speed sensor using a multimeter.
4
Check the condition of the ABS tone ring for any missing teeth or damage.
5
Verify the operation of the ABS control module by checking for communication with the OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Wheel chocks
•Jack stands

Parts Required

•Left front wheel speed sensor (if replacement is necessary)
•ABS tone ring (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm C0035 is present.
2
Inspect the wheel speed sensor wiring and connector for damage or corrosion.
3
Measure the resistance of the left front wheel speed sensor using a multimeter.
4
Check the condition of the ABS tone ring for any missing teeth or damage.
5
Verify the operation of the ABS control module by checking for communication with the OBD-II scanner.

Solution

1. Preparation

Tools Required: OBD-II scanner, multimeter, socket set, torque wrench, wheel chocks, jack stands.
Safety Warnings: Ensure the vehicle is on a level surface, engage the parking brake, and use wheel chocks.

2. Inspect Wheel Speed Sensor

Sub-steps:
1. Raise the front of the vehicle and secure it with jack stands.
2. Remove the front left wheel using a socket set.
3. Locate the wheel speed sensor on the hub assembly.
4. Disconnect the sensor harness.
5. Visually inspect the sensor for cracks or damage.

3. Test Wheel Speed Sensor

Sub-steps:
1. Use a multimeter to measure the resistance of the sensor (should typically be between 800-1200 ohms).
2. If the resistance is out of this range, replace the wheel speed sensor.

4. Inspect ABS Tone Ring

Sub-steps:
1. Check the ABS tone ring for any signs of damage or missing teeth.
2. If damaged, replace the tone ring as necessary.

5. Reassemble and Clear Codes

Sub-steps:
1. Reconnect the wheel speed sensor harness.
2. Reinstall the front left wheel and torque the lug nuts to the manufacturer's specification (typically 80-100 ft-lbs).
3. Lower the vehicle and reconnect the battery if disconnected.
4. Use the OBD-II scanner to clear the C0035 code.