FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda CR-V Fifth Generation (2017-2022) check engine light flash when accelerating - Honda CR-V
Home/Cars/Honda/CR-V/Sixth Generation (2023-present)/why does my Honda CR-V Fifth Generation (2017-2022) check engine light flash when accelerating

why does my Honda CR-V Fifth Generation (2017-2022) check engine light flash when accelerating

Honda CR-V Sixth Generation (2023-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
585 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine misfire issues in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before beginning any electrical work.
  • •Allow the engine to cool before inspecting or working on the ignition system.

Symptoms

  • •Check engine light flashing during acceleration
  • •Reduced engine power
  • •Increased fuel consumption
  • •Engine vibration or rough running
  • •Possible smell of unburned fuel
  • •Engine stalling or hesitation

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Fuel pressure gauge
  • •Vacuum gauge
  • •Torque wrench

Parts Required

  • •Spark plugs (if needed)
  • •Ignition coils (if needed)
  • •Fuel injectors (if needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, socket set, multimeter, fuel pressure gauge, vacuum gauge, and torque wrench.
  • Disconnect the negative battery terminal to ensure safety during repairs.
2. Address Ignition System Issues
  1. Remove the Engine Cover (if applicable):
    • Use a socket set to remove any bolts securing the cover.
  2. Inspect Spark Plugs:
    • Remove spark plugs with a spark plug socket.
    • Check for wear or fouling; replace if necessary with OEM-spec plugs.
  3. Inspect Ignition Coils:
    • Remove ignition coils from their respective cylinders.
    • Test each coil's resistance with a multimeter; replace any that are out of specification.
  4. Reinstall Components:
    • Torque spark plugs to manufacturer specifications (usually around 13-16 lb-ft).
    • Reinstall ignition coils and engine cover.
3. Check Fuel System
  1. Test Fuel Pressure:
    • Connect a fuel pressure gauge to the fuel rail.
    • Turn the ignition to the ON position without starting the engine; read the pressure.
    • Compare with manufacturer specifications (approximately 40-50 psi).
  2. Inspect Fuel Injectors:
    • Check for proper operation with a multimeter or injector tester.
    • Clean or replace any faulty injectors.
4. Inspect Air Intake and Related Sensors
  1. Check for Vacuum Leaks:
    • Use a vacuum gauge to check for leaks in the intake manifold.
    • Repair any leaks found.
  2. Inspect MAF Sensor:
    • Disconnect the MAF sensor and clean it with MAF sensor cleaner.
    • Reconnect and ensure no wires are damaged.
5. Verify Engine Compression
  • Perform a Compression Test:
    • Remove spark plugs and insert a compression gauge into the cylinder.
    • Crank the engine and record the pressure; compare against manufacturer specifications (usually around 180 psi).
    • Address low compression issues if found.