why does my Honda CR-V Fifth Generation (2017-2022) jerk when shifting gears

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

556 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components.

Symptoms

•Jerking or lurching during gear changes
•Delayed shifting between gears
•Slipping sensation as the vehicle changes gears
•Unusual noises (clunking or grinding) during shifts
•Check engine light illuminated (if applicable)
•Poor acceleration performance

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related faults.
2
Check transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination or metal shavings.
4
Examine the engine and transmission mounts for signs of wear or damage.
5
Test the throttle response and inspect the throttle position sensor for proper operation.
6
Perform a visual inspection of wiring and connectors related to the transmission control module.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Funnel
•Drain pan
•Socket set
•Torque wrench
•Jack
•Jack stands
•Multimeter
•Screwdriver

Parts Required

•Transmission fluid (Honda ATF-Z1 or equivalent)
•Transmission mounts (if damaged)
•Throttle position sensor (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related faults.
2
Check transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination or metal shavings.
4
Examine the engine and transmission mounts for signs of wear or damage.
5
Test the throttle response and inspect the throttle position sensor for proper operation.
6
Perform a visual inspection of wiring and connectors related to the transmission control module.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal to ensure safety.

2. Check and Replace Transmission Fluid

Tools Required: Funnel, drain pan, socket set, torque wrench.
Sub-steps:
1. Locate the transmission dipstick and remove it.
2. Insert a funnel into the dipstick tube and add new transmission fluid as per manufacturer specifications.
3. If the fluid appears contaminated, drain the old fluid using a drain pan.
4. Replace with new transmission fluid, ensuring to use the correct type (typically Honda ATF-Z1 or equivalent).
5. Reinstall the dipstick and reconnect the battery terminal.

3. Inspect and Replace Transmission Mounts

Tools Required: Jack, jack stands, socket set.
Sub-steps:
1. Safely lift the vehicle using a jack and secure it with jack stands.
2. Locate the transmission mounts and inspect them for cracks or wear.
3. If damaged, remove the bolts securing the mount to the vehicle frame and transmission.
4. Replace with new mounts and torque bolts to manufacturer specifications.
5. Lower the vehicle back to the ground.

4. Throttle Position Sensor Adjustment

Tools Required: Multimeter, screwdriver.
Sub-steps:
1. Locate the throttle position sensor on the throttle body.
2. Disconnect the wiring harness and check the sensor's resistance with a multimeter.
3. If readings are outside of specs, replace the throttle position sensor.
4. Reconnect the wiring harness and clear any error codes using the OBD-II scanner.