why does my Honda CR-V Fifth Generation (2017-2022) make a grinding noise when braking

Solution

1. Preparation

• Gather tools and materials: socket set, torque wrench, brake cleaner, and new brake pads and rotors if necessary.
• Ensure the vehicle is parked on a level surface and the ignition is off.
• Wear safety gloves and goggles.

2. Raise the Vehicle

• Use a jack to lift the vehicle and secure it on jack stands.
• Remove the wheel covering the affected brake system.

3. Remove Brake Components

• Brake Caliper Removal
  • Use a socket to remove the caliper mounting bolts.
  • Carefully slide the caliper off the rotor and support it using a bungee cord or rope (do not let it hang by the brake line).
• Brake Pad Inspection and Replacement
  • Remove the old brake pads from the caliper bracket.
  • Compare the thickness of the old pads with new ones; replace if worn.

4. Inspect and Replace Brake Rotors (if necessary)

• Rotor Removal
  • Remove any retaining screws if applicable.
  • Slide the rotor off the hub; if stuck, gently tap with a mallet.
• Install New Rotor
  • Clean the new rotor with brake cleaner to remove any protective coating.
  • Slide the new rotor onto the hub and secure it with retaining screws.

5. Reassemble Brake Components

• Install New Brake Pads
  • Apply brake grease to the backing of new pads to prevent noise.
  • Place new pads in the caliper bracket.
• Reattach Brake Caliper
  • Position the caliper over the pads and align it with the mounting bracket.
  • Tighten caliper mounting bolts to the manufacturer's specified torque.

6. Final Steps

• Reinstall the wheel and tighten lug nuts in a crisscross pattern.
• Lower the vehicle from jack stands.
• Pump the brake pedal to seat the brake pads against the rotor.