why does my Honda CR-V Sixth Generation (2023-present) check engine light flash

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the engine is cool.
• Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Replace Spark Plugs

• Remove the engine cover if necessary.
• Disconnect the ignition coil connectors.
• Unscrew and remove the spark plugs using a spark plug socket.
• Inspect spark plugs for wear; replace if fouled or worn.
• Install new spark plugs and torque to manufacturer specifications (typically around 13-16 ft-lbs).
• Reconnect ignition coil connectors.

3. Check and Replace Ignition Coils

• If spark plugs are in good condition, inspect ignition coils.
• Remove ignition coil bolts and carefully pull out the coils.
• Test coils with a multimeter; replace if readings are outside specifications.
• Install new ignition coils and secure with bolts.

4. Clean or Replace Fuel Injectors

• If misfire persists, remove the fuel rail to access injectors.
• Clean injectors using an ultrasonic cleaner or replace them if clogged.
• Reassemble the fuel rail with new gaskets and ensure proper sealing.

5. Inspect Exhaust System

• Check for any leaks or damage in the exhaust system that may cause back pressure issues.
• Repair or replace any damaged components as necessary.

6. Reconnect Battery and Clear Codes

• Reconnect the negative battery terminal.
• Use the OBD-II scanner to clear any stored error codes.