how do I fix the rear windows not working in my Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

526 words

Problem Statement

Learn how to diagnose and fix rear windows not working in Honda Pilot Third Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts or shocks.
•Allow the vehicle to cool down if the work area is near hot components.

Symptoms

•Rear windows do not respond to switch inputs
•No sound or movement when window switch is pressed
•Front window switches may still function normally
•Check window lock feature (if equipped) is not engaged
•Possible blown fuse for rear windows

Diagnostic Steps

1
Inspect the window lock switch to ensure it is not engaged.
2
Check the fuse box for any blown fuses related to the rear windows.
3
Test the rear window switches for continuity using a multimeter.
4
Inspect the wiring harness to the rear doors for any visible damage or disconnections.
5
Verify the operation of the rear window motors by applying direct power to them.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Screwdriver set
•Trim removal tools
•Fuse puller

Parts Required

•Replacement fuses (if blown)
•Replacement window switch (if defective)
•Replacement window motor (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the window lock switch to ensure it is not engaged.
2
Check the fuse box for any blown fuses related to the rear windows.
3
Test the rear window switches for continuity using a multimeter.
4
Inspect the wiring harness to the rear doors for any visible damage or disconnections.
5
Verify the operation of the rear window motors by applying direct power to them.

Solution

1. Preparation

Gather tools including a multimeter, screwdriver set, and trim removal tools.
Disconnect the negative battery terminal to ensure safety while working on electrical components.

2. Check and Reset Window Lock

Locate the window lock switch on the driver's side panel.
Ensure the switch is in the "unlocked" position.
Reconnect the battery and test the rear windows again.

3. Inspect and Replace Fuses

Locate the fuse box under the dashboard or hood (refer to the owner’s manual).
Identify the fuse related to the rear windows (check the diagram on the fuse box cover).
Remove the fuse using a fuse puller and inspect it visually; if blown, replace with a fuse of the same amperage.

4. Test Rear Window Switches

Remove the switch panel from the rear door using trim removal tools.
Use a multimeter to test for continuity across the switch terminals while pressing the switch.
If the switch is faulty, replace it with a new one.

5. Inspect Wiring Harness and Motor

Check the wiring harness for any signs of fraying or damage.
If damage is found, repair or replace the affected wires.
If the wiring is intact, access the rear window motor by removing the door panel.
Test the motor by applying direct battery power to the motor connections; if it does not operate, replace the motor.